Designing plastic parts is a complex task involving many factors that address a list of requirements of the application. “How is the part to be used?” “How does it fit to other parts in the assembly?” “What loads will it experience in use?” In addition  to functional and structural issues, processing issues play a large role in the design  of an injection molded plastic part. How the molten plastic enters, fills, and cools  within the cavity to form the part largely drives what form the features in that part must take. Adhering to some basic rules of injection molded part design will  result in a part that, in addition to being easier to manufacture and assemble, will typically be much stronger in service. Dividing a part into basic groups will help you to build your part in a logical manner while minimizing molding problems. As a part is developed, always keep in mind how the part is molded and what you can do to minimize stress.23558
Table of Contents
(a) Applications
(b) Polymers Best Suited for Injection Molding
(c) Injection Molding Equipment
(d) Injection Molding Process
(e) Injection Molding Cycle
(f) Different Types of Injection Molding Processes
(g) Stress
(h) Gates
(i) Common Gates
(j) Gate Location
(k) Wall Thickness
(l) Draft
(m) Sink Marks
(n) Textures
(o) Parting Lines
(p) Common Molding Defects
Applications
Plastic injection molding is the preferred process for manufacturing plastic parts. Injection molding is used to create many things such as electronic housings, containers, bottle caps, automotive interiors, combs, and most other plastic products available today. It is ideal for producing high volumes of plastic parts due to the fact that several parts can be produced in each cycle by using multi-cavity injection molds. Some advantages of injection molding are high tolerance precision, repeatability, large material selection, low labor cost, minimal scrap losses, and little need to finish parts after molding. Some disadvantages of this process are expensive upfront tooling investment and process limitations.
Polymers Best Suited for Injection Molding 
Most polymers may be used, including all thermoplastics, some thermosets, and some elastomers. There are tens of thousands of different materials available for injection molding. The available materials mixed with alloys or blends of previously developed materials means that product designers can choose from a vast selection of materials to find the one that has exactly the right properties. Materials are chosen based on the strength and function required for the final part; but also each material has different parameters for molding that must be considered. Common polymers like Epoxy and phenolic are examples of thermosetting plastics while nylon, polyethylene, and polystyrene are thermoplastic.
Injection Molding Equipment
Injection Molding Machine:
Injection molding machines, also known as presses, consist of a material hopper, an injection ram or screw-type plunger, and a heating unit. Molds are clamped to the platen of the molding machine, where plastic is injected into the mold through the sprue orifice. Presses are rated by tonnage, which is the calculation of the amount of clamping force that the machine can exert. This force keeps the mold closed during the injection molding process. Tonnage can vary from less than 5 tons to 6,000 tons, although the higher tonnage presses are rarely used. The total clamp force needed is determined by the projected area of the custom part being molded. This projected area is multiplied by a clamp force of from 2 to 8 tons for each square inch of the projected areas. As a rule of thumb, 4 or 5 tons/in can be used for most products. If the plastic material is very stiff, it will require more injection pressure to fill the mold, thus more clamp tonnage is needed to hold the mold closed. The required force can also be determined by the material used and the size of the part with larger plastic parts requiring higher clamping force. 注塑成模具英文文献和中文翻译:http://www.youerw.com/fanyi/lunwen_16679.html