毕业论文

打赏
当前位置: 毕业论文 > 外文文献翻译 >

起重机液压系统支腿的智能故障诊断英文文献和中文翻译

时间:2021-10-10 16:09来源:毕业论文
Abstract The complexity of hydraulic systems of crane outriggers is growing, which demands the fault diagnosis of the systems to be faster and comprehensive。 Based on the structural characteristics of the hydraulic systems of crane outrig

Abstract  The complexity of hydraulic systems of crane outriggers is growing, which demands the fault diagnosis of the systems to be faster and comprehensive。 Based on the structural characteristics of the hydraulic systems of crane outriggers,  this  paper  proposes  a  rapid  and  extensive hardware and software architecture model of conditioning monitoring and fault diagnosis system。 In this paper, tree diagnostic  method  and  fuzzy  neutral  network  theory  is applied; the theoretical basis as well as the implementation method for this and similar hydraulic systems' fault diagnosis is provided。72679

Keywords   Cranes, Fault diagnosis, Neural network

 1  Introduction   

Truck crane is an important model of engineering machinery。With its growing complexity in structure and function, it is more prone to complex troubles, so that it is harder to diagnosis the fault for hydraulic system of cranes outriggers。 In such scenarios, a single theory or method, whether classic or smart, is far from sufficient to achieve fault diagnosis that are comprehensive, accurate and fast。

     Nevertheless, the combination of classic method and smart, two smart methods or more, may make a good compromise between the diagnosis' accuracy and speed。 With the above understanding,  this  paper  utilizes  a  combined  diagnosis algorithm, which is the fuzzy neural network, for the fault diagnosis  of  hydraulic  system  of  crane  outriggers。  The algorithm is implemented with a hardware platform and a software model of the diagnosis that realized the condition monitoring and fault diagnosis of the hydraulic system。

2  Establishment of fault diagnosis model of the hydraulic system of outriggers based on fuzzy neural network

     The fuzzy neural network (FNN) structure model collects the advantages of neural network and fuzzy theory。 The FNN used by fault diagnosis of the hydraulic system of outriggers in this paper is shown in figure 1。

     The FNN is based on BP (Back Propagation) artificial neural network and uses the tandem way with fuzzy system。 The input and output of the network are fuzzy quantity and membership of some features and some models。 The network structure is pided into five layers, input layer, fuzzy layer,hidden layer, output layer, fuzzification elimination layer。

              Fig。 1 Structure model of FNN algorithm

     Input layer is the first layer of the network。 This layer receives  input  characteristic  signal  from  outside  before directly transports the characteristic signal to the second floor--fuzzy neurons。 The transfer weight is 1。 The number of nodes  in  the  input  layer  depends  on  the  number  of characteristic signal of the diagnosis。

Fuzzy layer is the second layer of the network。 Its function is to calculate membership of the input characteristics signal that belongs to fuzzy set of each variable value, according to the  membership  functions  of  the  fuzzy  subsets。  After fuzzification, each input layer node corresponds to three fuzzy layer nodes, representing the high side, normal and the low side respectively。 Therefore, the number of nodes is 3 times of the number of input nodes。

Hidden layer is the third layer of the network。 It is used to implement the mapping from input variable fuzzy value to the output variable fuzzy value。 The activation function used is Sigmoid function。 The number of the nodes is two times of the number of fuzzy layer nodes, according to theorem  of Kolmogorov。 During the training process, adjustments can be made according to different level of accuracy。 起重机液压系统支腿的智能故障诊断英文文献和中文翻译:http://www.youerw.com/fanyi/lunwen_82719.html

------分隔线----------------------------
推荐内容