摘要：本基坑工程“南汇医学院二期基坑围护设计”分为J区与H区进行基坑围设计。J区开挖深度为5.4m局部7.0m，基坑面积约为1580m^2，周长约170m ；H区开挖深度为4.0m，基坑面积约为5135m^2，周长约340m，两个区域采用不同的围护形式， J区采用SMW工法，H区采用水泥土重力式围护墙，熟练地运用软件对围护结构进行整体稳定、抗隆起、抗渗流等验算，并且自行计算典型剖面。通过围护结构的计算结果进行支撑布置和计算，并计算配筋。通过对J区和H区的各个剖面计算结果进行平面施工图的绘制，包括有：各个剖面图，两个区域的平面图，支撑布置图，立柱布置图，降水布置图。本次基坑围护图纸共计12张。36028
毕业论文关键词：基坑围护设计；型钢水泥土搅拌桩；水泥土重力式围护墙；钢支撑；降水及监测
Nanhui MEDICAL Two Foundation Pit Design
Abstract: The excavation area is pided into J and H zone foundation pit design. Excavation depth J area of 5.4m partial 7.0m, pit area of approximately 1580m ^ 2, a circumference of about 170m; excavation depth H zone is 4.0m, pit area of approximately 5135m ^ 2, a circumference of about 340m, two regions using different forms of containment, J region using SMW method, H zone using cement soil gravity enclosure wall, skillfully use the software to envelope the overall stability, anti-bump, anti-seepage checking, and automatically calculates the typical sections. Layout and be supported by calculations envelope calculation and calculate reinforcement. Through the various cross-sectional area and the J H region results drawn flat construction plans, including: the inpidual sections, plans two regions, support layout, column layout, precipitation layout. The foundation pit drawing a total of 14.
Keywords: foundation pit design; steel cement mixing pile; cement soil gravity enclosure wall; steel support; precipitation and Monitoring
目录
1. 工程概况 1
1.1 工程简介 1
1.2 基坑工程简况 1
1.3 工程地质概要 1
1.3.1 土层特性 2
1.3.2 地下水 2
1.3.3 不良地质现象 2
1.4 周围环境概况： 3
1.5 场地总平面 3
2. 方案比选 4
2.1 我国基坑工程发展概况 4
2.2 我国基坑开挖支护结构类型 4
2.3 本工程方案选择及拟定 5
2.3.1 围护结构方案选择 5
2.3.2 围护方案及支撑系统方案拟定 6
2.4 设计依据及执行规范 6
2.4.1 设计依据 6
2.4.2 执行规范 6
3. 基坑围护墙设计 7
3.1 剖面1—1设计 7
3.1.1 工程概况 7
3.1.2 地质条件 7
3.1.3 施工工况 8
3.1.4 土压力和水压力 8
3.1.5 抗隆起验算 12
3.1.6 抗倾覆稳定计算 14
3.1.7 抗渗流稳定验算 15
3.1.8 整体稳定验算 16
3.1.9 墙体内力变形计算 19 南汇医学院基坑围护设计计算书+CAD图纸:http://www.youerw.com/gongcheng/lunwen_34319.html