毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

社区网球馆结构设计说明书+CAD图纸(2)

时间:2019-06-09 15:37来源:毕业论文
The structure of this design uses the reinforced concrete frame structure. The frame structure is characterized by beam column load bearing, the wall only separates, the retaining function, the room a


The structure of this design uses the reinforced concrete frame structure. The frame structure is characterized by beam column load bearing, the wall only separates, the retaining function, the room arrangement is more flexible. Natural conditions are as follows: basic wind pressure: 0.55kN/m2 (return period is 50 years); basic snow pressure: 0.20kN/m2 (return period is 50 years); local area of the basic earthquake intensity is 7 degrees; earthquake is grouped into the first group; site classification as type IV; according to the height of the building and fortification intensity, seismic level of this building is three. Geological conditions and geological assessment of the site are as follows: the bulk density of soil is calculated according to 18kN/m3, and the vertical distribution and the main physical and mechanical indexes of the soil are the geological prospecting report..
Main materials: strip foundation under wall, single column using C30, plain concrete cushion C20. Frame column, beam, plate, stairs C30 concrete pouring. The HPB335 grade steel stirrups, beams and columns made of HRB400 steel. Steel, steel, steel Q235B or Q345, welding rod: according to the JGJ18-2003 welding and acceptance procedures, the third chapter of the use of. Structural column, wall beam, horizontal filling wall opening frame, capping cast-in-place lintel, grade of concrete strength by C20. The parapet exposed cast-in-place component and not marked by C30 concrete pouring.
目  录
第1章 基本资料    1
 1.1 工程概况    1
 1.2 设计基本条件    1
   1.2.1 设计要求    1
   1.2.2 气象条件    1
   1.2.2 地质条件及地理情况    1
 1.3 设计依据    1   
第2章 结构设计    2
 2.1 设计资料    2
 2.2 网架形式和几何尺寸    2
 2.3 屋面板的设计计算    2
   2.3.1 荷载计算    2    
   2.3.2 檩条计算    3   
第3章 结构电算    4
 3.1 MST建筑模型和荷载输入    5
   3.1.1 建模    5
   3.1.2 约束设置    7
   3.1.3 荷载输入    9
   3.1.4 设置参数    14
 3.2 分析设计    16
   3.2.1 数据检查    16
   3.2.2 工况组合    17
   3.2.3 满应力设计    17
   3.2.4 验算并调整    19
   3.2.5 高强度螺栓、套筒设计/验算    20
   3.2.6 球节点设计/验算    22
   3.2.7 节点翻样    23                                         
     3.3 生成结果图形    25
   3.3.1 绘图综合信息    25
   3.3.2 布图    26
   3.3.3 图纸生成    27
   3.3.4 生成DWG文件    28
  第4章 节点设计    28
 4.1 支座反力    28
 4.2 节点计算    29
   4.2.1 节点A1    29
   4.2.2 节点A3    33
   4.2.3 节点C49    37
   4.2.4 节点C49    40 社区网球馆结构设计说明书+CAD图纸(2):http://www.youerw.com/gongcheng/lunwen_34446.html
------分隔线----------------------------
推荐内容