本论文首先阐述了交通路锥自动收放装置的研究背景以及国内外发展历程、现状和发展趋势；接着对交通路锥自动输送机构设计中所用到的相关理论进行阐述以及详细介绍了交通路锥自动输送机构设计中所用到的工具软件SolidWorks，然后进入设计主体部分：首先介绍了交通路锥自动收放车的设计概述，然后概述介绍了路锥自动收放车总体方案设计及路锥自动输送机构总体方案设计，接着重点阐述了交通路锥自动输送机构的路锥输送过程以及交通路锥自动纵向和横向输送机构各部分结构设计过程，然后对输送时间以及输送过程中的动力等进行分析计算，并对结构中的主要承力件进行刚强度校核。最后完成交通路锥自动纵向和横向输送机构的工程图，并将它们作为附件附在论文后面。5077
关键词 交通路锥自动输送机构 结构设计 刚强度校核 SolidWorks软件 Abaqus软件
毕业论文设计说明书（论文）外文摘要
Title The Design of Automatic Traffic Cone Conveying Mechanism
Abstract This article firstly describes the research background of the automatic traffic cone placing and retrieving device as well as the Development process、current situation 、development trend at home and abroad; then gives a related theory to the design of automatic traffic cone conveying mechanism. Then detailed introduces the softwares used in the design of the automatic traffic road cone conveying mechanism: SolidWorks，Then entered into the main design part, firstly introduces the structure design of the automatic traffic cone placing and retrieving device, and then focuses on the conveying process of the automatic traffic cone conveying mechanism and the structure design of either the traffic cone automatic vertical conveying mechanism or the automatic horizontal conveying mechanism, and then analysis the time as well as the power in the delivery process. Then carries a stiffness and strength check on the main bearing member in the structure. Finally completes the engineering drawings of the traffic cone automatic vertical conveying mechanism and horizontal conveying mechanism and attaches them as an annex at the end of the article.
Keywords Automatic traffic cone conveying mechanism Structure design Rigidity and strength checking SolidWorks Abaqus
目 次
1 绪论 1
1.1 课题研究历程、研究现状 1
1.2 课题发展趋势 5
1.3 论文的主要工作安排 6
2 路锥自动输送机构理论基础 7
2.1 机械设计基础 7
2.2 材料力学 8
2.3 Solidworks软件 9
2.4 Abaqus软件 9
3 路锥自动收放车的设计概述 12
3.1 主要用途 12
3.2 系统设计要求 12
3.3 路锥自动收放车构成 12
3.4 路锥自动收放车动力选择 13
4 某路锥自动收放车总体方案设计及路锥自动输送机构总体方案设计 16
4.1 某路锥自动收放车系统设计要求 16
4.2 某路锥自动收放车系统整体设计 16
4.3 路锥自动输送机构总体方案 18
5 路锥自动输送机构各机构设计 20
5.1 横向输送机构设计 20
5.2 纵向输送机构设计 23 SolidWorks交通路锥自动输送机构设计+文献综述:http://www.youerw.com/jixie/lunwen_1974.html