摘要插床是机械加工工业中的重要设备，在机械加工领域中应用十分广泛。目前机床行业市场竞争十分激烈，对机床的精度和效率提出了更高的要求，插床的设计是本次毕业设计的首要任务。
为了提高插床机构的工作效率，常采用摆动导杆机构的形式，根据使用要求确定的行程速度变化系数k或极位夹角与该机构的各尺寸有关，为了提高插床主体机构设计的速度和设计质量，采用了计算机进行辅助设计。
插床主体机构尺寸的设计一般采用图解法，该法简单、明了，但设计粗糙、设计速度慢、设计周期长，在市场竞争激烈的今天，不能满足设计要求。52530
在参考大量文献资料的基础上，根据毕业设计题目的要求，设计了一种简易的插床。该插床机构主要由齿轮机构，导杆机构，曲柄滑块机构组成。本文首先对齿轮机构，导杆机构和曲柄滑块机构进行了设计计算，然后再用Pro/E对插床机构进行了三维建模，最后用ADAMS软件进行了插床机构的运动学仿真，并对其结果进行了分析，对在机械设计中使用虚拟样机技术做了尝试，积累了经验。
毕业论文关键词：插床机构；Pro/E；建模；设计
ABSTRACT Slotting machine is an important equipment of machining industry, in the field of machining have a wide range of applications. At present, the machine tool industry is extremely competitive market for machine tool accuracy and efficiency of a higher demand, slotting machine body design is the design of the school's top priority.
In order to improve the efficiency of the slotting machine body, often using swing-bar mechanism mediated form, in accordance with the requirements identified by the use of the speed of changes in itinerary or very bit coefficient k and the angle between the size of the relevant bodies, in order to improve the slotting machine design speed of the main agencies and design quality, use of computer-aided design.
Slotting machine design of the main body size generally used graphic method, the method is simple, clear, but the design of rough, slow design, the design of long cycle and competitive in the market today, can not meet the design requirements.
In reference to a large number of documents on the basis of the graduation project in accordance with the requirements of the topic, design a simple slotting machine. The gear slotting machine mainly by institutions, guided-bar mechanism, the composition of slider-crank mechanism. This article first gear mechanism, lead-bar mechanism and slider-crank mechanism to carry out the design and calculation, and then re-use Pro / E on the slotting machine three-dimensional modeling agencies, and finally using ADAMS software Kinematics slotting machine simulation, and the results of the analysis, mechanical design in the use of virtual prototyping technology has done to try and accumulated experience.
Key word: The slotter organization；Pro / E; Modeling ；Design
目 录
第1章 绪论.1
1.2插床概述..1
1.3本论文研究的主要内容..2
第2章 插床机械结构的设计3
2.1方案设计..3
2.1.1方案要求4
2.1.2方案功能设计与分析5
2.2方案结构设计与分析..5
2.2.1插床导杆机构设计11
2.2.2飞轮设计15
2.2.3凸轮机构设计16
2.2.4齿轮机构设计18
第3章 插床机构模型搭建.14
3.1杆组的概念..20
3.2构件的选择..22
第4章 插床建模与仿真..24
4.1三维建模软件的简介24 ADAMS+PRO/E插床机构设计及分析+CAD图纸:http://www.youerw.com/jixie/lunwen_56437.html