聚能射流破甲战斗部毁伤反应装甲分析与研究

毕业设计说明书中文摘要反应装甲能明显地降低射流的侵彻能力。通过查阅文献资料，本文论述了反应装甲的发展和国内外反应装甲的研究现状。论文对反应装甲干扰射流的机理作了解释，飞板和爆轰产物都会影响射流的侵彻能力。76817

论文通过理论分析并结合文献资料，建立了单层反应装甲对射流干扰的理论模型，并且通过多次数值模拟，得出典型因素对射流成型的影响规律。利用正交优化设计得出破甲战斗部的基本参数。本文的主要内容包括：

（1）反应装甲干扰射流模型。通过整理关于射流侵彻的理论知识，得到了射流侵彻反应装甲的理论模型和飞板干扰射流的间隙逃逸模型。

（2）锥角、药型罩壁厚、装药高度影响射流成型的仿真分析。通过改变某一参数，保持其他参数不变进行数值模拟，得到典型因素对射流头部速度、射流长度、射流直径的影响趋势。

（3）通过正交优化设计得到最优的破甲战斗部结构，并建立射流侵彻倾斜68°反应装甲的模型。建立了最优的破甲战斗部，并通过数值模拟得到射流引爆反应装甲的仿真模型，并对仿真结果进行了进一步说明。

毕业论文关键词反应装甲聚能射流数值模拟正交优化破甲战斗部

毕业设计说明书外文摘要

Title Analysis of Damage to Reactive Armor by Shaped Jet

Abstract ERA can reduce the ability of the jet obviously。 This paper discusses the development of the ERA and the current research status。 Papers explained the mechanism of the ERA interfering the jet, including fly board and detonation products。

Papers set up the theoretical model of the single ERA on the jet interference through the theoretical analysis and combined with literature, and Paper obtained the typical factors influence about jet molding through numberical simulation for many times。 Using the orthogonal optimization design obtained the basic parameters of the high explosive anti-tank cartridge。 So the major study context in this paper includes those:

(1)The ERA interference model of jet is studied。 In according to collating of jet penetration theory, which get the jet penetration theoretic model and fly aboard armors interference model of the jet on the sidelines of the escape。

(2)The angle, the thickness of the shaped charge liner, charging high impact jet molding simulation analysis is studied。 Based on keeping other parameters constant for numberical simulation, it gets the typical factors influence of jet velocity, jet length, jet diameter through changing the parameters of a particular。

(3)It is studied that can get the optimal structure of shaped charge warhead by orthogonal optimization design, and established the jet penetrating the model of the tilt 68°ERA 。Paper explained the simulation results according to the simulation model of the jet flowing the ERA。

Keywords ERA Shaped Jet Numerical Simulation Orthogonal Optimization Shaped Charge Warhead

1 绪论…1

1。1 研究背景与意义1

1。2 国内外研究现状及发展趋势…2

1。2。1 反应装甲的发展与应用2

1。2。2 国内反应装甲的发展情况…3

1。3 反应装甲干扰射流机理…3

1。3。1 反应装甲飞板对射流的干扰作用4

1。3。2爆轰产物对射流的干扰作用4

1。4 本设计的难点与解决方法5

1。5 本章小结…6 聚能射流破甲战斗部毁伤反应装甲分析与研究:http://www.youerw.com/jixie/lunwen_88178.html