毕业论文移动版

摘要被人们喻为“巨人之臂”、“画在天空中的弧、“力与美的象征”的起重机，广泛应用于国民经济各部门进行物质生产和装卸搬运的重要设备。起重机是指在一定范围内垂直提升和水平搬运重物的多动作起重机械。又称吊车。属于物料搬运机械。起重机的工作特点是做间歇性运动，即在一个工作循环中取料、运移、卸载等动作的相应机构是交替工作的。51364

本次设计是关于回转液压起重机的机械设计，本起重机满足船级社的最新要求，主要供船舶起吊生活用品及船舶用品。首先，根据给定的主要技术参数运用solidworks画出各个零件的三维图，然后做出装配图；然后，根据给定的主要技术参数进行总体部件的设计校核计算：起重臂的的设计校核计算，起重臂的稳定性校核计算，臂架支承校核设计计算，油缸支撑轴校核设计计算，回转部分校核设计计算，液压泵站校核设计计算。通过校核计算，本次设计满足校核要求。

毕业论文关键字：回转液压起重机；机械设计；solidworks

Abstract By people known as the”Giant of the arm”,”draw the art in the sky”,”a symble of strength and beauty” ,of the crane is widely used in material production sectors of the national economy and the importance of loading and unloading 。Crane is that in a certain range of multiple motion vertical lifting and horizontal lifting hoisting machinery. Also called crane. Belonging to material handling machinery. Crane's work is characterized by intermittent exercise to do, namely, the corresponding mechanism of material in a working cycle of migration, the unloading action of the alternate work.

    This design is the mechanical design of slewing hydraulic crane, the crane to meet the new requirements of classification society, mainly for daily necessities and ship lifting equipment. Firstly, according to the main technical parameters are given by using SolidWorks to draw the 3D map of each part, and then make the assembly drawing; then, design and calculation of the general parts according to the main technical parameters given: Calculation of the boom design, stability calculation of boom boom, calculation of bearing design, shaft design calculation of hydraulic cylinder support, calculation the rotating part design, calculation of the hydraulic pump station design. Finally the calculation results into design specifications.

Keywords: Rotary hydraulic crane; mechanical design; solidworks

目   录

第一章 绪论 1

1.2重机的发展趋势 1

1.2.1起重机目前发展状况 1

1.2.2 发展趋势 2

1.3起重机设计的意义 3

1.4 论文的主要工作内容 3

第二章  回转液压起重机结构及性能特点 5

2.1回转起重机简介 5

2.2 回转液压起重机的特点 5

2.3 回转液压起重机的整机结构及性能参数 6

2.4液压回转起重机液压系统的组成及工作原理 7

第三章  总体部件设计及计算 9

3.1 起重臂设计计算 9

3.1.1 起重臂强度校核计算 9

3.1.2 N截面强度校核 9

3.1.3 M截面强度校核 10

3.2 起重臂稳定性计算 (责任编辑：qin)