毕业论文移动版

摘要散货船与其他船型相比，具有工艺相对容易、技术相对成熟等优点。并且作为我国各大船厂设计与制造主流船型之一，有着巨大的市场需求。本次设计的船型为79600DWT散货船，依据《钢质海船入级与建造规范》（2006年）进行结构规范计算以及强度校核。本文是着重进行货舱区域和艏艉主要构件尺寸的计算。本船是钢质散货船，在货舱机舱区设双底，货舱区域设双舷,货舱底部和甲板采用纵骨架式，非货舱区域采用横骨架式结构。58708

    本文的主要内容包括：

    1．散货船的发展概况、分类，结构规范设计概述以及设计存在的问题。

    2．79600DWT近海散货船船体结构规范计算书。

    3．船中货舱区横剖面的弯曲强度校核。

    4．中横剖面图，基本结构图以及货舱舱壁结构图的绘制。

毕业论文关键词：海船；散货船；规范设计；货舱横剖面图；基本结构图；机舱横剖面图

Abstract Compared with other ship types, bulk carriers have the advantages of relatively easy process and mature technology. And as one of the main ship types in the design and manufacture of our country, there is a huge market demand. This design of the ship is 79600DWT bulk cargo ship, as its technical characteristics, accordance with the 《steel seagoing vessel rules for the classification and construction》(2006) to the calculation and the required strength.This article is focused on the calculation of the cargo area and the area of bow and stern.This ship is a steel cargo ship.The cargo area and engine room are equipped with the double bottom.The cargo area is also equipped with the double hull.The cargo at the bottom and the deck use longitudinal framing. The non-cargo area use the transverse framing.

     The main contents include :

     1.Development situation and classification of cargo ship. Structure specification design overview and design problems exist.

     2.79600DWT offshore cargo ship structure specification calculations.

     3. The cross-section of the cargo area bending strength check.

     4.Mapping of the midship section, basic construction and the structure drawing of  the  bulkhead  of  the cargo hold.

第一章 绪论 1

1.1散货船发展过程和发展趋势 1

1.2散货船的分类 3

1.3散货船的特点 4

1.4结构设计的概述 5

1.4.1结构设计的依据 5

1.4.2结构设计的方法 5

1.4.3结构设计的步骤 5

1.4.4计算书计算步骤 6

1.4.5结构布置的一般原则 6

1.5设计存在的问题 7

第二章 结构规范计算书 8

2.1概述 8

2.2主要尺度及数据 8

2.3外板 8

2.3.1船底板 8

2.3.2平板龙骨 10

2.3.3 舭列板 11

2.3.4舷侧外板 11

2.3.5舷顶列板 14

2.3.6与艉柱、轴毂处连接的外板 (责任编辑：qin)