毕业论文移动版

摘要曲柄压力机是通过曲柄滑块机构将电动机的旋转运动转化为滑块的直线往复运动，从而对胚料进行成型加工的锻压机械。曲柄压力机工作平稳可靠，广泛应用于冲压、挤压、锻模和粉末冶金等工艺。本文论述了曲柄压力机的定义、组成和工作原理，以及压力机的分类。并根据给定参数，确定曲柄滑块部分的设计方案，如曲轴、连杆、滑块、滑动轴承以及推料、过载、封闭高度调节等装置。通过计算、校核确定各个零件的尺寸规格及安全。最后运用三维软件绘制曲柄压力机传动机构简图，完成对曲柄压力机曲柄滑块机构的设计。60079

毕业论文关键词：压力机  曲柄  滑块  机械制造

毕业设计说明书（论文）外文摘要

Title The Slider-crank Mechanism Design of Open-cycle Crank Press

Abstract Crank pressure machine is a forging machine that changes the rotation of motor into the reciprocating motion of the slider ,so that the feedstock can be molded. The crank press movement is steady and reliable, and it is widely used in crafts such as ramming, extrusion, drop forging and powder metallurgy. This article discusses the definition, crank press composition and work principle, and the classification of the press. According to the given parameters, the overall design programme is given. The components of the slider-crank mechanism are including following, such as the crankshaft, connecting rod, slider, sliding bearings and overload, closed height adjustment devices so on. The size specifications of the various parts are determined by calculating and checking. Finally, three-dimensional modeling of the crank pressure machine is given to by using the Solid works.

Keywords：  pressure machine  crank   slider  machine manufacture

目   录

1 引言 1

1.1 冲压加工 1

1.2 压力机 1

1.3 冲压加工设备发展现状及趋势 4

1.4 研究内容 5

1.5 研究意义 6

1.6 论文组织结构 6

2 固定台压力机结构方案设计 7

2.1 曲柄压力机工作原理 7

2.2 曲柄形式 8

2.3 固定台压力机总体方案设计 9

2.4 小结 9

3曲柄滑块机构设计与计算 10

3.1 设计参数 10

3.2 曲柄滑块机构的运动分析与受力分析 10

3.3 曲柄滑块机构的设计与计算 13

3.4 装模高度调节装置设计及电动机的选定 20

3.5 曲轴轴承的设计计算 27

3.6 滑块与导轨 28

3.7 过载保护装置 30

3.8 推料装置 32

3.9 小结 34

4 Solidworks建模设计 35

4.1 Solidworks三维建模设计 35

4.2 主要零部件的三维solidworks模型 35

4.3 曲柄滑块机构装配图建模 39

4.4 小结 40

总结与展望 (责任编辑：qin)