4000DWT沿海货船系船设备设计+CAD图纸
时间:2022-02-26 21:46 来源:毕业论文 作者:毕业论文 点击:次
摘要本文重点研究的是系船设备的设计,对象是 4000DWT 沿海货船,货船类型是集 装箱货船。其长度为 96。235m,宽度为 14。6m,属于小型沿海货船。对本船的系船设 备的设计本文分两大部分,第一部分是锚泊设备的设计与布置,第二部分是系泊设 备的设计与布置,锚泊设备的设计相对第二部分更为重要一些,也是本文的重点研 究对象。其中两部分的设计都涉及到舾装数的计算,因此对于系船设备的设计第一 步便是舾装数 N 的计算,计算结果为 598。092。随后根据舾装数选取锚和锚链,本船 的选配是 1740KG 的斯贝克锚及直径为 42mm 的 AM1 级有档电焊锚链。所配备的锚 链筒的长度为 2300mm,选用圆形锚链舱,其设计后的高度为 5。939m。其后的锚机、 掣链器、弃链器等的相关选配根据下文详细论述。系泊设备的设计根据舾装数 N 选 取直径为 40mm 的化学纤维缆丙纶缆,其后相关设备如绞缆机,带缆桩,导缆器的 相关设备的选配见下文详细论述。最后进行的是锚泊设备和系泊设备的相关检验与 实验,对其安全性合理性及可靠性的相关检验。78313 毕业论文关键词:锚泊设备、锚链筒、系泊设备、系泊索。 Abstract This paper focuses on the design of the marine equipment, the object is the 4000DWT coastal cargo ship, the type of cargo ship is a container ship。 Its length is 96。235m, the width is 14。6m, belongs to the small coastal cargo ship。 On the ship's mooring equipment design of this paper is pided into two parts。 The first part is the design and layout of the anchoring and mooring equipment。 The second part is the design and layout of mooring equipment, design of anchoring and mooring equipment relative to the second part of some of the more important and the key research object。 The two parts of the design are designed to outfitting number calculation。 Therefore, the first step in the design of mooring equipment is the outfitting number n of calculation, the calculation results for 598。092。 Then anchor and anchor chain are selected according to the number of outfitting, matching the vessel is 1740KG of Speke anchor and diameter of 42mm AM1 level have file electric welded anchor。 Hawsepipe with the length of 2300mm, the circular chain locker, the design height of 7。396m。 The related matching machine, anchor chain stopper, and chain regulator and other according to the following detailed description。 Design of mooring equipment according to N, the number of outfitting choosing the diameter of 40mm chemical fibre rope polypropylene cable, followed by related equipment such as stranding machine, bollards, selection of equipment of the cable guide see below in detail。 Last is the anchoring and mooring equipment related inspection and test, the tests on the safety of rationality and reliability。 Keywords: Mooring equipment, Hawsepipe , Mooring, Mooring cable 目 录 第一章 绪论 1 1。1 船舶系船设备概述 1 1。2 4000DWT 沿海散货船简介 1 1。3 舾装数 N 的概念及本船舾装数的计算 2 第二章 4000DWT 沿海货船锚设备设计 5 2。1 锚设备概述及设计方法 5 2。1。1 锚设备的组成 5 2。1。2 锚设备的工作原理 5 2。1。3 锚设备的设计方法及要求 6 2。2 按 N 选配锚及锚链 7 2。3 首锚设备的布置设计 (责任编辑:qin) |