毕业论文移动版

摘要双目立体三维测量是测距的一种重要方式，它是利用成像设备从不同的位置获取被测物体的两幅图像，利用相机成像机理计算图像对应点间的位置偏差，来获取物体三维几何信息的方法。

本文在以往的研究基础上，继续探讨了利用摄像设备从不同角度获取目标物图像，并对图像进行处理以还原目标物体三维位置的方法。实验通过GPS设备精确测量目标三维位置信息，通过使用灯光制造特征点方便图像特征点的提取，并通过合理优化程序检测图像中的特征点信息，并通过数据处理还原特征点的三维信息。82075

一个完整的双目测量系统通常可分为图像获取、摄像机标定、特征提取、立体匹配、目标定位等部分。本文主要是对摄像机标定、目标定位这两方面的内容进行说明。本文首先根据选择的立体视觉成像系统模型阐述了立体视觉测距的基本原理。其次，对图像特征点提取等预处理方法进行简略地分析，并通过实例对部分算法进行了验证。

毕业论文关键词  计算机视觉 双目立体  相机标定  目标定位 

Title    three dimensional measurement technology of    the  binocular stereo                                               

Abstract Binocular stereo vision measurement is a kind of important form of 3D measurement, it is based on the principle of parallax and the imaging device to obtain the object to be measured of two images from different locations, through the position deviation of calculated image corresponding points to obtain geometrical information of 3D objects。

In this paper,  it discusses the use of camera equipment from different angles to get the target image on the basis of previous studies, and processes the image  methods to restore the 3D target position。 Through GPS equipment ,the experiment can accurate measure the 3D information of the target, through the use of light manufacturing feature points extraction of image feature points, and by optimizing the program to detect the feature points and through data processing the three-dimensional information of the feature point reduction。

A complete binocular measurement system can be pided into image acquisition, camera calibration, feature extraction, stereo matching, object orientation and so on。 This paper is mainly discussing the two aspects of the camera calibration, target positioning。

Firstly, this paper describes the basic principle of stereo vision distance measurement according to the choice of stereo vision imaging system model。 Secondly, the pretreatment method of image feature extraction is analyzed, and the algorithm is verified by an example。

Keywords computer vision   Binocular stereo  Camera calibration Target location 

目 录

1  绪论 1

1。1 课题研究背景 1

1。2 双目测量的国内外研究现状 1

1。3 论文主要的内容与结构 2

2  双目立体测距技术基础 3

2。1 坐标系简介 3

2。2 针孔成像模型 3

2。3 双目视觉中相机的几何分析 5

2。4  MATLAB对图像的预处理 6

2。5 本章小结 9

3 图像特征点的提取 10 (责任编辑：qin)