- 上一篇：医院和医疗设施空调英文文献和翻译
- 下一篇：嵌入式系统对空调舒适温度控制的英文文献和翻译
6. Research on structures and connections subject to seismic forces
The most compelling driving force for the present structural steel research effort in the US was the January 17, 1994 earthquake in Northridge, California, North of Los Angeles. The major problem for steel structures was the extensive failure of prequalified welded rigid joints by brittle fracture. In over 150 buildings of one to 26 stories high there were over a thousand fractured joints. The buildings did not collapse, nor did they show any external signs of distress, and there were no human injuries or deaths. A typical joint is shown in Fig. 2.2.1.
In this connection the flanges of the beams are welded to the flanges of the column by full-penetration butt welds. The webs are bolted to the beams and welded to the columns. The characteristic features of this type of connection are the backing bars at the bottom of the beam flange, and the cope-holes left open to facilitate the field welding of the beam flanges. Fractures occurred in the welds, in the beam flanges, and/or in the column flanges, sometimes penetrating into the webs.
Once the problem was discovered several large research projects were initiated at various university laboratories, such as The University of California at San Diego, the University of Washington in Seattle, the University of Texas at Austin, Lehigh University at Bethlehem, Pennsylvania, and at other places. The US Government under the leadership of the Federal Emergency Management Agency (FEMA) instituted a major national research effort. The needed work was deemed so extensive that no single research agency could hope to cope with it. Consequently three California groups formed a consortium which manages the work:
(1) Structural Engineering Association of California.
(2) Applied Technology Council.
(3) California Universities for Research in Earthquake Engineering.
The first letters in the name of each agency were combined to form the acronym SAC, which is the name of the joint venture that manages the research. We shall read much from this agency as the results of the massive amounts of research performed under its aegis are being published in the next few years.
The goals of the program are to develop reliable, practical and cost-effective guidelines for the identification and inspection of at-risk steel moment frame buildings, the repair or upgrading of damaged buildings, the design of new construction, and the rehabilitation of undamaged buildings.~ As can be seen, the scope far exceeds the narrow look at the connections only. The first phase of the research was completed at the end of 1996, and its main aim was to arrive at interim guidelines so that design work could proceed. It consisted of the following components:
~ A state-of-the-art assessment of knowledge on steel connections.
~ A survey of building damage.
~ The evaluation of ground motion.
~ Detailed building analyses and case studies.
~ A preliminary experimental program.
~ Professional training and quality assurance programs.
~ Publishing of the Interim Design Guidelines.
A number of reports were issued in this first phase of the work. A partial list of these is appended at the end of this paper.
During the first phase of the SAC project a series of full-scale connection tests under static and, occasionally, dynamic cyclic tests were performed. Tests were of pre-Northridge-type connections (that is, connections as they existed at the time of the earthquake), of repaired and upgraded details, and of new recommended connection details. A schematic view of the testing program is illustrated in Fig. 2.2.2 Some recommended strategies for new design are schematically shown in Fig. 2.2.3.
-
正交试验回归法和响应曲...
-
RANSAC算法全景图像拼接关键技术研究+源程序
-
ADO.NET结构与概述英文文献和中文翻译
-
升式单位上升操作结构英文文献和中文翻译
-
基卡气体管道PLEM结构的原...
-
推土机翻滚保护结构的性...
-
嵌入型锚在软硬海底的抓...
上市公司股权结构对经营绩效的影响研究
中国传统元素在游戏角色...
巴金《激流三部曲》高觉新的悲剧命运
江苏省某高中学生体质现状的调查研究
C++最短路径算法研究和程序设计
g-C3N4光催化剂的制备和光催化性能研究
高警觉工作人群的元情绪...
现代简约美式风格在室内家装中的运用
浅析中国古代宗法制度
NFC协议物理层的软件实现+文献综述