高强铝合金多层结构整体钎焊过程数值模拟研究

摘要通过对高强铝合金多层结构整体钎焊原理的研究，利用ADINA有限元分析软件建立了高强铝合金整体钎焊过程温度场的有限元分析模型。本试验针对高强铝合金多层结构模型钎焊温度场进行数值模拟。在高强铝合金多层结构整钎焊接数值模拟过程中，得出了高强铝合金的瞬态温度场分布，模拟结果能够正确地反映出高强铝合金多层结构模型钎焊过程中的温度分布、变化规律。试验可得，高强铝合金多层结构模型的四周温度高钎料较早熔化，而中间的温度较低钎料还没熔化，高强铝合金多层结构模型的焊缝区和热影响区的温度差别并不大，试验的数据都表明二者在加热阶段温差最大，但是保温阶段温差最小。钎料厚度的不同，对温度场的影响并不明显。67485

毕业论文关键词高强铝合金多层结构钎焊数值模拟温度场

毕业设计说明书（论文）外文摘要

Title Multilayer structure high-strength aluminum alloy brazing process numerical simulation research as a whole

Abstract

Based on multi-layer high-strength aluminum alloy structure overall brazing principle research, high strength aluminum alloy was established based on scaled fem software adina.the whole temperature field finite element analysis model of the brazing process. This test for high strength aluminum alloy brazing multilayer structure model for numerical simulation of temperature field. Multilayer structure in high strength aluminum alloy entire braze welding numerical simulation process, the transient temperature field distribution of high strength aluminum alloy is obtained, the simulation results can accurately reflect the multi-layer high-strength aluminum alloy structure model of the temperature distribution and change law in the process of soldering. Test, multi-layer structure model of high strength aluminum alloy around high temperature solder melting, early and middle low temperature solder hasn't melted yet, multi-layer structure model of high strength aluminum alloy weld zone and heat-affected zone temperature difference is not big, experiment data show that both the temperature maximum during the heating phase, but the heat preservation stage temperature difference is minimal. Solder thickness is different, the impact on the temperature field is not obvious.

Keywords high strength aluminum alloy multilayered structure brazing the numerical simulation the temperature field

1 绪论 1

1.1 高强铝合金研究现状 1

1.2 高强铝合金焊接方法研究现状 1

1.2.1 高强铝合金的焊接方法 1

1.2.2 高强铝合金的焊接特点 2

1.3 铝合金的真空钎焊 2

1.3.1 真空铝钎焊原理 3

1.3.2 真空铝钎焊设备 3

1.3.3 铝合金钎焊方法 3

1.3.4 Al的钎焊与其他金属的钎焊相比较为困难的主要原因 3

1.3.5 钎焊接头中常见的钎焊缺陷 4

1.4 本课题研究目的及内容 4

1.4.1 研究目的 4

1.4.2 研究内容高强铝合金多层结构整体钎焊过程数值模拟研究:http://www.youerw.com/cailiao/lunwen_75700.html