摘要：注塑模具在现代生活中应用最为广泛，塑料制品在生活中使用最多。因此，研究注塑模具对提高塑料制品质量和生产效率有着重要的意义。随着 CAD/CAE/CAM 技术的发展，模具设计趋向智能化和高精度化。利用 NX/MoldWizard 模块进行咖啡机机嘴塑模具设计，与传统的模具设计相比，大大缩短了模具设计周期，提高了工作效率。本课题是关于咖啡机机嘴 1+1+1 模式带有斜侧抽注塑模具设计，设计的产品为外形较为复杂的三个不同制件，需要较多侧抽机构和斜侧抽机构辅助成型。此次设计包括产品模流分析、分模设计、斜侧抽机构设计、浇注系统设计、冷却系统设计等，同时生成模具总装配图及部分零件的二文图。 由于制件需要较多的侧抽机构且考虑制件的成型性能和冷却效果，所以型腔布局的设计是个难点和关键点。本次设计使用NX模流分析模块对产品进行分析， 通过模拟模流运动实现充模过程， 分析设计中制件成型的缺陷以便于优化设计。34722
毕业论文关键词： 注塑模具；斜侧抽机构；咖啡机机嘴
Inject mold Design of Camera
CaseAbstract: Injection mold is most widely used in modern life, and plastic products are most usedin our daily life. Therefore, it is very important to focusing on improving the quality of theplastic production and its efficiency. With the development of CAD/CAE/CAM technology, themold design is turning to more intelligent and higher precision. Comparing to the traditionalmold design, it is more efficient to do the design work by using the NX/Mold Wizard, whichalso shorten the design cycle.This design is about the mouth of the coffee machine in 1 + 1 + 1 model with inclined sidesmoke injection mold design. The appearance of this product is very complex which needsseveral core-pulling structures to assist moulding. The whole process of this design includingmold flow analysis, parting analysis, side smoke injection mold design, gating system design,cooling system design,etc. 2D drawing will also be exported after the 3D mold design.Considering its complexity, formability and the cooling effect should also be taken into account.The key point of this design is the parting layout. Moldflow analysis will be used after the 3Dpart is completed, which can analyze product flaws and optimize the product design bysimulating the mold-filling process.
Key words: Injection mould; Oblique slider; Coffee machine nozzle
目录
1绪论.1
1.1我国模具市场现状分析1
1.2注塑模现状及发展趋势1
2塑件产品设计2
2.1塑件材料的特性及成型性能分析2
2.1.1材料特性.2
2.1.2塑件材料的成型性能分析2
2.2塑件分析及结构优化.2
2.2.1塑件外形分析.2
2.2.2塑件壁厚分析.4
2.2.3塑件结构成型优化5
3模具设计6
3.1注射成型工艺简介6
3.2注塑成型工艺条件6
3.3注射机的初步选择7
3.3.1注射机的基本参数7
3.3.2注射机的选择.7
3.4分型面的选择.8
3.5模架的初步选择及成型零件设计10
3.5.1模架的初步选择.10
3.5.2型腔数目的确定及排列.10
3.5.3模仁尺寸的确定.11
3.5.4成型零件的组成与脱模系统的设计16
3.5.5侧向分型与抽芯机构设计17
3.6浇注系统的设计19
3.6.1浇口类型的选择.19
3.6.2浇口位置的选择.19
3.6.3主流道设计22
3.6.4分流道和冷料井的设计.24
3.6.5浇注系统的平衡（模流分析）.25
3.7合模导向机构的设计.25
3.7.1导向机构的功能.25
3.7.2导向机构的结构设计.26
3.8模架的选用.26
3.9温度调节系统设计28
3.9.1冷却装置的计算.28
3.9.2冷却水路的总长度30
3.9.3冷却水体积流量的计算.30
3.10其他组件设计.31 NX咖啡机三个机嘴斜滑块模具设计+CAD图纸:http://www.youerw.com/jixie/lunwen_32332.html