摘要随着社会进步和经济社会的发展，人们对医疗器械的精细水平要求越来越高，高精度传感器的出现给了现代医学的器械参数测量很好的技术支持，使用高精度传感器和高性能单片机设计出能够精确测量现代医疗器械参数的装置不仅对医疗领域具有很重要的意义，还对促成信号处理技术、微型控制器技术、微型传感器技术等范畴的研究具有重要的作用，为人们的健康生活、现代科技的进步和人类社会的进步做出了巨大的贡献。医疗镊子作为医疗器械中最典型、最基础、最常见的器械，对它的弹力进行精确测定对于医疗领域十分有必要。26351
本论文具体论述了医疗镊子弹力测定装置的硬件设计和软件设计。
医疗镊子弹力测定装置包括称重传感器电路模块、电源模块、信号放大调理电路模块、单片机模块、LCD显示模块，完成对作用于传感器上的微弱压力信号的检测、调理、模数转换、压力值的计算以及显示。
关键词 医疗镊子 传感器 单片机 信号调理
毕业论文设计说明书外文摘要
Title Design of Medical Forcep Elasticity Test Device
Abstract
With social progress and economic and social development, people are fine level of medical devices have become increasingly demanding, the emergence of high-precision sensors to measure the parameters of the instrument of modern medicine good technical support, the use of high-precision sensors and high-performance MCU Modern medical equipment can accurately measure the parameters of the device is designed not only for the medical field is very important, also contributed to the study of the scope of signal processing technology, micro-controller technology, micro-sensor technology has an important role for people's health living progress and the progress of human society, modern technology has made tremendous contributions. Medical forceps as a medical device in the most typical, the most basic, the most common instrument, its elasticity accurate measurement for the medical field is necessary.
This paper discusses the hardware and software design of medical forcep elasticity test device.
Medical forcep elasticity test device including the weighing sensor circuit modules, power modules, signal conditioning circuit amplification module, microcontroller module, LCD display module, complete action on weak pressure sensor detected signal conditioning, analog-digital conversion, calculated pressure values, and display.
Keywords medical forceps sensors microcontroller signal conditioning
目 次
1 绪论 1
2 医疗镊子弹力测定装置总体设计 4
2.1 医疗镊子弹力测定装置总体设计 4
2.2 本章小结 4
3 医疗镊子弹力测定装置硬件设计 5
3.1 电源模块 5
3.2 传感电路模块 6
3.3 信号调理电路模块 7
3.4 单片机核心电路模块 8
3.5 LCD显示模块 10
3.6 本章小结 11
4 医疗镊子弹力测定装置软件设计与测试校正 12
4.1 医疗镊子弹力测定装置软件设计 12
4.2 医疗镊子弹力测定装置测试结果及系统误差校正 15
4.3 本章总结 17
5 总结与展望 18
5.1 总结 18
5.2 展望 18
结论 19
致谢 20
参考文献 21
附录A 医疗镊子弹力测定装置硬件电路原理图 22
1 绪论
1.1 课题研究背景及意义
微控制单元，英文Microcontroller Unit，简称MCU。又称为单片微型计算机，英文Single Chip Microcomputer，简称单片机，是把中央处理器即CPU的频率与规格做适当缩减，并将内存、数模模数转换、UART、计数器、USB等接口，甚至LCD的驱动电路全部整合在单一芯片上，形成芯片级的计算机，实现为不同的环境做出不同组合的控制或操作。 医疗镊子弹力测定装置设计+电路图:http://www.youerw.com/tongxin/lunwen_20492.html