摘要随着滚动直线导轨的快速发展，厂家对滚道直线导轨副的综合性能和运动精度的要求也越来越高，滚动直线滑块作为滚动直线导轨副的一个构件，它的端面几何精度对导轨副的运动精度有着重要的影响。本论文重点研究基于非接触式检测技术，对于已经加工好的滑块进行滚道的廓形测量，提高滑块的检测效率。43293
本论文首先对滑块滚道型面廓形的测量方案进行了研究，选择了适当的传感器-光谱共焦式传感器IFS 2402/90-10，设计并加工了配套的传感器夹具，完成了滚动直线导轨副滑块滚道检测装置的测控系统的搭建，基于Visual Basic完成了配套软件的编写，可实现滑块滚道廓形的快速测量，后期完成了实验数据的分析处理和拟合，可生成相应的滚道的廓形图。通过检测滑块滚道的廓形，可验证其加工是否达到所需要求。
毕业论文关键词：滚动直线滑块 滚道型面 廓形检测 光谱共焦
毕业设计说明书外文摘要
Title slider face geometric accuracy non-contact Automatic rapid detection technology research
Abstract
With the rapid development of the rolling linear guide ,the requirements of the comprehensive performance and accuracy are getting higher and higher.As a component of the rolling linear guide rail pair,rolling linear slider end face geometric accuracy has a important influence on the movement precision of the guide rail pair .For sliders have been processed to roll the profile measurement ,the focus of this article is to study how to improve the detection efficiency of the slider based on non-contact detection technology.
This paper firstly study the measurement scheme on the slide roll road surface profile, and choosing the appropriate sensor spectral con-focal sensor-IFS 2402/90-10, then designing and processing the complementary sensor fixture, finishing the building of the control device of rolling linear guide rail side slider roll detection , completing the supporting software programmed slider rolling road profile of rapid measurement based on Visual Basic, the later completing the experimental data processing and analysis of the fitting, can generate corresponding roller road profile graph. By detecting the slider rolling road profile, the software can verify its processing whether reach the requirement.
Keywords rolling linear slide, block surface, profile detection spectral con-focal
目 次
1 绪论 1
1.1 滑块几何精度检测的重要性 1
1.2 滑块端面几何精度检测技术的研究现状 1
1.3 本文要研究的内容 4
2 传感器的选型 5
2.1 二维高速测量仪 TM3000-065 6
2.2 基恩士激光位移传感器LK-H020 7
2.3 光谱公焦式传感器IFS 2402/90-10 9
2.4 本章小结 10
3 滑块滚到廓形测量方案的研究 11
3.1 试验台的搭建 11
3.1.1 试验台硬件系统搭建 11
3.1.2 夹具的设计 14
3.2 试验台的电路连接 16
3.2.1光栅尺与数采卡的连接 16
3.2.2 运动控制器、电机细分驱动器与步进电机的连接 17
3.2.3 米铱传感器系统的连接 滑块端面几何精度非接触式自动快速检测技术研究:http://www.youerw.com/tongxin/lunwen_44060.html