摘要科学的进步使社会中的电子产品日益复杂，这使得自动检测系统逐步代替传统的人工检测维护手段。本课题针对某雷达设备的电路板故障检测，设计基于通用检测平台的专用适配器硬件电路。65327

首先根据故障检测需求，确定专用适配器FPGA+ARM的设计总方案，并细化了适配器电路板指标要求；选择了ATMEL公司的ARM芯片AT91SAM9G20和ALTERA公司的FPGA芯片EP3SE110作为主处理器，完成了适配器电路原理图的设计；同时完成了多层电路板的设计及PCB布线；加工装配后对电路板进行了测试，测试结果表明本设计达到了设计要求。

毕业论文关键词  故障检测  适配器  FPGA  ARM 

毕业设计说明书（论文）外文摘要

Title  Fault detection device-specific adapter

Abstract

The progress of science made the electronic products of our society became more complex, thus automatic detection system gradually replaces the traditional inspection and maintenance way.The subject is mainly about to design a dedicated adapter hardware circuits based on general detecting platform aim at the fault detection of a radar equipment.

First, according to the needs of fault detection, the project has made the choice of the overall program of special adapter FPGA+ARM and refines the requirements of the adapter board index; ARM chip AT92SAM9G20 of ATMEL company and FPGA chip EP3SE110 of ALTERA company have been chosen as the main processer to finish the design of adapter circuit diagram; completes  a multi-layer circuit board design and PCB layout at the same time ; then tests the circuit board after processed and equipped, the test results show that the design meets the design requirements.

Keywords fault detection  adapter  FPGA  ARM

目  录

1  绪论 1

1.1  课题研究背景 1

1.2  研究现状 2

1.3  开发软件介绍 3

1.4  本文内容及章节安排 3

2    专用适配器总体设计 3

2.1  设计思路 3

2.2  总框架图及设计指标 5

3    专用适配器的电路设计 6

3.1  ARM系统电路 6

3.1.1  ARM的供电电路 7

3.1.2  时钟电路 9

3.1.3  复位电路 10

3.1.4  存储电路 10

3.1.5  网络接口电路 13

3.1.6  ARM_DAC 14

3.2  FPGA系统电路 15

3.2.1  FPGA供电电路 16

3.2.2  FPGA的配置电路 18

3.2.3  存储电路 20

3.2.3  FPGA时钟电路 21

3.3  ADC 22

3.4  DAC 23

3.5  驱动 24

3.6  PCB设计 26

4    系统调试 27

4.1  测试方案 FPGA+ARM故障检测设备专用适配器硬件设计:http://www.youerw.com/tongxin/lunwen_72904.html