- 上一篇：模具热处理及其导向平行设计英文文献和中文翻译
- 下一篇：梁桥英文文献和中文翻译
10. In a hydraulic system, a piston and cylinder construction, means movable by said piston to projected and retracted positions, a source of liquid under pressure, valve means for distributing such liquid to the cylinder at opposite sides of the piston to project and retract said means, fast and slow valves controlling the rate at which i said liquid is supplied to the cylinder, means controlling said valves whereby said liquid is supplied at a higher rate during initial movement of the first mentioned means toward and its final movement from projected position than during final movement of said first mentioned means toward projected position and its initial movement from projected position whereby said first mentioned means is moved at a faster rate during the first mentioned times than during the latter mentioned times, said means controlling said valves comprising electrical means, switch means controlling said electrical means, means whereby on its movements to and from projected position the means movable by the piston trips said switch means to close said fast valve and open said slow valve as said means completes the initial part of its movement toward projected position and to close said slow valve and open said fast valve as the said means movable by the piston completes the initial part of its movement toward retracted position, said switch means including adjustable means that may be tripped by the means movable by the piston from the desired position of the latter to vary the relation between the initial and final positions of its movements, and said means for opening said slow valve including a cam whereby the rate of opening of said valve is controlled by the contour of said cam.
这项发明有关,一般来说,文章的涂料油漆,清漆,等。发明是参考,更加特别,一种新型浸漆浸涂机的文章或其他涂料涂层的文章。
浸渍机到目前为止用于涂料的文章一般都有些不满意的地方的使用，这种机器会形成环或山脊涂层，主要因为由电动机驱动的传动装置的振动,等。此外,这种机器时常速度不当导致漆或其他涂层材料,从而大大损害了涂层的外观。
本发明的主要对象是提供一个新颖的浸渍机的构造和安排,克服上面的缺点,机器可以适应迅速产生完全覆盖对象在数量上。
另一个发明的对象在于提供一种新颖的浸渍机上面的字符有手段提升和降低容器的提升和降低涂层材料的容器的工作的文章,后者被固定。
还是另一个发明的对象是提供一个新颖的浸渍机简单,英式橄榄球形状的和可靠的建设,表示机器很容易操作和经济上文护。
这项发明的其他对象,实在是太多了就不在这里一一介绍了,将从以下的详细描述清楚一样。
发明在附带的图纸中所示,在这:
图1是浸渍机的主视图,机器的前面板被打破了,以更好地说明机器的建设。
图2是一个机器的侧视图,一个侧板被打破了,以更好地说明这台机器。
图3是机器的计划视图部分断了.
图4是一个剖视图沿着线4 - 4的图3的方向箭头,说明这台机器的操作,和图5是一个透视图前面的图4所示的结构涂层材料容器破裂。
参考类似物都是用于表示视图来显示相应的部分。
提到现在说图纸,参考数字1指定帧的四个角钢支柱相互联系和一些小的金属条.2做好准备。表3是固定在框架顶部的1。正直的支架4安装在表3的部分结束时,括号表示4在可调范围内纵向的表3通过螺栓20和槽36。
安装在表3的两个支架4两端部分和通过双杠5互联附加在其结束括号4翼螺栓6。机翼螺栓6扩展通过任何选定的水平对齐把多数的支架4两端的表。因此,通过删除从一对翼螺栓6 7孔插入另一个低或高副孔7中的小型金属5可能上调或下调。
小型金属5适应支持水平面板8最好是提供了一个多元化的不同大小的孔9可能通过摩擦力接收和支持10携带暂停工作。11涂层(见图4和5)。涂层材料容器12是适应定位低于8,容器12 13被垂直安装在一个可移动的长方形平台。平台13是固定在活塞杆14的上端向下延伸至表3的孔,通过上面的头或液压缸的15日,16固定其低端往复式活塞在汽缸15。尤其是图4活塞16所示是最好提供向下直接杯皮革17防止水向上的流逝过去的活塞16。