菜单
  
    Abstract Axial compression of aluminium spherical shells of R/t values ranging from 25 to 43 was per-formed under central loading. Quasi-static tests were conducted on an INSTRON machine (model 1197) of 50T capacity. Spherical shells were tested to identify their modes of collapse and to study the associated energy absorption capacity. In experiments all the spherical shells were found to collapse due to formation of an axisymmetric inward dimple associated with a rolling plastic hinge. A Finite Element computational model of development of the axisymmetric mode of collapse is also presented. Experimental and computed results of the deformed shapes and their corresponding load–compression and energy–compression curves were presented and compared to validate the computational model. The computed variations of the different strains and stresses were also studied. On the basis of the computational results mechanics of the development of the axisymmetric inward dimple mode of collapse has been presented, analysed and discussed.Keywords Hemispherical shells · Rolling plastic hinge · Energy absorption · FORGE2List of symbolsR mean radius of the spherical shellL span of the spherical shellZ depth of the spherical shellt average thickness of the spherical shellrp radius of the rolling or travelling plastic hingeh total axial compression of the spherical shell at any stage of compressionP load on the spherical shell at any stage of compressionMp plastic moment per unit length˜ Sij deviatoric stress tensorK material cnsistency˙ ¯ ε effective strain ratem strain rate sensitivity index 21675
    K constant term
    1 Introduction
    Thin walled structural shell elements such as cylindrical shells, conical shells and domes are commonly used
    as energy absorbing elements in crashworthiness applications. Study of their collapse behaviour has received
    considerable attention of the researchers in the last four decades [1–10]. Experimental and analytical studies
    on these structural elements have been carried out under both quasi-static and dynamic loadings in axial and
    lateral directions. Johnson and Reid reviewed the modes of collapse of various thin-walled shells and their
    corresponding load–compression curves [1].
    Large deformation of a rigid plastic hemispherical shell compressed between two rigid parallel plates was
    studied by performing experiments and proposing analytical models obtained from their experimental finding
    by few researchers [2–7] in the past. Among these, only De Oliveira and Wierzbicki [4] have studied the
    deformation of the spherical shell under concentrated point load as well as between rigid plates as a part of
    their studies on the crushing analysis of rotationally symmetric plastic shells. They proposed equation (1) to
    predict the load deformation relationship for spherical shell under central point load through their analysis.
    In their analysis they assumed formation of the two rolling plastic hinge in the current deforming region at
    a spacing of “b”. Load deformation behaviour in this analysis was shown to be independent of the radius of
    spherical shell.
    where β is the angle subtended by chord length “b”, h is compression, P is the collapse load, Mp is the plastic
    moment per unit length, t is the thickness of shell, R is the mean radius of the shell.
    Recently finite element method has been employed [9,10] to analyse the axisymmetric concertina mode
    of collapse developed in axial compression of moderately thick metal tubes. However available literature is
    scarce regarding the study of development of axisymmetric mode of collapse occurs in the axial compression
    of hemispherical domes.
    In the present work an attempt has been made to study the axial compression of aluminium hemispherical
    shells under quasi-static loading. Hemispherical shells resting on flat plate are compressed with axial central
  1. 上一篇:散热器恒温阀英文文献和中文翻译
  2. 下一篇:注塑模具英文文献及中文翻译
  1. 压缩机壳体用铝合金英文文献和中文翻译

  2. 加压蛋壳分析英文文献和中文翻译

  3. 轴压圆柱壳的屈曲特性英文文献和中文翻译

  4. 石油化工及相关金属球阀...

  5. Moldflow软件在复杂的塑料外...

  6. 金属镶件的注塑件脱模后...

  7. 金属板料冲压模具计算机...

  8. 浅析中国古代宗法制度

  9. C++最短路径算法研究和程序设计

  10. g-C3N4光催化剂的制备和光催化性能研究

  11. 中国传统元素在游戏角色...

  12. NFC协议物理层的软件实现+文献综述

  13. 现代简约美式风格在室内家装中的运用

  14. 巴金《激流三部曲》高觉新的悲剧命运

  15. 高警觉工作人群的元情绪...

  16. 江苏省某高中学生体质现状的调查研究

  17. 上市公司股权结构对经营绩效的影响研究

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回