- 上一篇：建模滚珠丝杠传动英文文献和中文翻译
- 下一篇：排气通风系统英文文献和中文翻译
window with a small clearance D typically of about 1 mm. Three input external
generalized forces (P—the rolling load, Fh—the horizontal force, and M—the rotating
torque) are acting on the roll system. In its corresponding skeletal structure
representation, numbers one, two, and three represent the lower BR, housing column,
and chock, respectively. The skeletal structure of the WR system is identical to that of
the BR system.
Based on the work presented above, the following conclusions can be drawn:(1)
Contemporary plate rolling mills are not statically determinate (unstable) because the side clearances of the roll system are not controlled effectively and the negative
effects of microbending deflections of the rolls on the performance of radial roller
bearing are not considered. (2) It is impossible to maintain the rolls parallel by offset
distance alone in four- or six-high plate rolling mills with clearances in the roll system.
On the contrary, the offset distance results in asymmetric cross and deviations in the
rolling load. Therefore, the offset distance should be eliminated.(3) A new transfer
mode of the rolling load is one of the methods for improving the performance of
rolling mills.
The authors gratefully acknowledge the support of the Science & Technology
Committee of the Tianjin government (Grant No.09ZCKFGX02800), the Doctoral
fund of the Ministry of Education of China (Grant No. 20111333110001), the
National Science and Technology Support Program (Grant No. 2011BAF15B01),
and the reviews and precious advice of Professor Kornel F.Ehmann from
Northwestern University as well.
References
[1] Japan Society for Plasticity Technology, 2006, Handbook of Plasticity Technol-
ogy, Corona Publishing, Tokyo.
[2] Korolev, A. A., 1965, Mechanical Equipment, Rolling Mills,
Metallurgical Press, New York.
[3] Zou, J. X., and Shi, C. D., 1993, Mechanical Theory and Structure Design of
Rolling Machines, Metallurgical Industry Press, Beijing.
[4] Fan, X. B., Zang, Y., and Wang, H. G., 2010, “Research on Hot Rolling Mill
Horizontal Vibration,” Iron Steel, 45(9), pp. 62–66.
[5] Yang, Q. J., Lian, J. C., and Duan, Z. Y., 1996, “Study on Dampers of 4-High
Cold Rolling Mill,” Iron Steel, 31(11), pp. 71–75.
[6] Zou, J. X., 1999, Metallurgy Mechanical Behavior, Science Press, Beijing.
[7] Shen, G. X., Shu, X. D., and Li, M., 2005, Theory and Practice of Micro
Dimensional Behavior on Rolling Mill, Science Press, Beijing.
[8] Cao, W. Q., and Xu, Z. Y., 2005, Mechanical Design, Mechanical Industry
Press, Beijing.
[9] Department of Theoretical Mechanics of Harbin Industry University, 2005,
Theoretical Mechanics II, 6th ed., Higher Education Press, Beijing.
[10] Wang, F. H., 1998, “Analyzing the Axial Force of Roller Mill Working Roller
Using Finite Element Method,” J. Coll. Anshan Iron Steel, 2, pp. 25–28.
[11] Li, M., Chen, Y. Q., and Sun, X. D., 2003, “Developing a Micro Dimensional
Controllable Roll System of Mill,” J. Light Alloy Fabr. Technol., 4,
pp.21–24.
[12] Kuroda, S., 2006, “Developed Pair Cross (PC) Mill,” Ind. Machinery, 8, pp.
43–46.
[13] Shen, G. X., Li, M., Shi, R., and Yangimoto, J., 2010, “Indeterminacy of the
Offset Mechanism and Microscale Static Determinacy of Roll System in Four- High
Mill,” J. Mech. Eng., 46(10), pp. 69–74.
[14] Shen, G. X., and Li, M., 2009, “Statically Determinate Characteristics of