- 上一篇：PHP安全英文文献和中文翻译
- 下一篇：注射成型模具英文文献和中文翻译
5.1 Hardware architecture
Figure 7 shows that the architecture of the control unit of the C4G is derived from the standard C3G control unit by integrating additional computing and interface boards. The C3G control unit is based on the VME-bus and comprises two processing boards, the robot CPU (RBC) and the servo CPU (SCC). The SCC is a multiprocessor board equipped with Motorola 68020/68882 CPUs and with Texas 320C25 DSP. The Motorola CPUs perform trajectory generation, in either joint or Cartesian space, and kinematic inversion, both every 10 msec; the DSP executes position set-point micro-interpolation and joint position control, at a sampling interval of 1 msec.
The additional boards are the sensor-based control CPU (SBC) and I/O boards to interface exteroceptive sensors. The SBC is in charge of supplying the additional computing power required to execute the new control functions. It gets sensor data from dedicated I/O boards plugged in the VME bus, and exchanges data with the RBC and SCC through the shared memory on the RBC, and it has to compute the corrections to position set points for hybrid control. The SBC hardware design has not been camed out; a second RBC or SCC would, rather, be used to eliminate the need for the board design and reduce spare-part costs.
摘要：工业机器人控制器基于传感器的设计，本文主要讲述控制技术。设计遵循的方法，旨在构建指导方针，设计过程中，要确保控制器的要求和能力之间的关联性和高度的灵活性。该设计包括三个步骤，即活动分析`优尔[文"论'文]网www.youerw.com，功能设计与实现。该方法特别重视前两个步骤论文网，设计原则和指导方针。所设计的控制器有能力执行加工操作和激光焊接，额外的人工辅助工作等。从工业和商业的角度来说有意义的操作。这些新功能将会实现和附加在基本产品中。
关键词：机器人控制;工业机器人;控制三要素;开放式控制系统;设计方法