- 上一篇：高速切削加工组合机床英文文献和中文翻译
- 下一篇：船用柴油发动机的活塞组件英文文献和翻译
1.10.3. the type and dimensions of the belt anchorages on the seat, of the seat
anchorage and of the affected parts of the vehicle structure;
1.11. ‘seat anchorage’ means the system by which the seat assembly is secured to the vehicle structure, including the affected parts of the vehicle structure;
1.12. ‘adjustment system’ means the device by which the seat or its parts can be adjusted to a position suited to the morphology of the seated occupant; this device may, in particular, allow:
1.12.1. longitudinal displacement,
1.12.2. vertical displacement,
1.12.3. angular displacement,
1.13. ‘displacement system’ means a device enabling the seat or one of its parts to
be displaced angularly or longitudina lly, without a fixed intermediate position, to facilitate passenger access;
1.14. ‘locking system’ means any device ensuring that the seat and its parts are maintained in any position of use and includes both devices to lock the seat back relative to the s eat and the seat relative to the vehicle.
▼M4
1.15. ‘reference zone’ means the space between two vertical longitudinal planes, 400 mm apart and symmetrical with respect to the H-point, and defined by rotation of the head-form apparatus, described in Annex II of Directive 74/60/EEC, from vertical to horizontal. The apparatus shall be positioned as described in that annex and set to the maximum length of 840 mm.
▼B
2. APPLICATION FOR EEC TYPE-APPROVAL
▼M4
2.1. The application for type-approval pursuant to Article 3 (4) of Directive 70/156/EEC of a vehicle type with regard to safety belt anchorages shall be submitted by the vehicle manufacturer.
2.2. A model for the Information Document is given in Appendix 3.
▼B
2.3 The manufacturer shall submit to the technical service either a
vehicle representative of the vehicle type to be approved or the parts of the
vehicle considered essential for the belt anchorage tests by the technical
service responsible for c onducting the approval tests.
▼M4
3. GRANTING OF EC TYPE-APPROVAL
3.1. If the relevant requirements are satisfied, EC type-approval pursuant to Article 4 (3) and, if applicable, 4 (4) of Directive 70/156/EEC shall be granted.
3.2. A model for the EEC type-approval certificate is given in Appendix 4. 。
3.3. An approval number of ccordance with Annex VII of irective 70/
156/EEC shall be assigned to each type of vehicle approved. The same Member State shall not assign the same number to another type of vehicle.