菜单
  
    Abstract  :The plastic product manufacturing industry has been growing rapidly in recent years.  One of the most popular processes for making plastic parts is injection moulding.  The design of injection mould is critically important to product quality  and efficient product processing.  Mould-making companies, who wish to maintain the competitive edge, desire to shorten both design and manufacturing leading times of the by applying a systematic mould design process.7263
    The mould industry is an important support industry during the product development process, serving as an important link between the product designer and manufacturer.  Product development has changed from the traditional serial process of design, followed by manufacture, to a more organized concurrent process where design and manufacture are considered at a very early stage of design.  The concept of concurrent engineering (CE) is no longer new and yet it is still applicable and relevant in today’s manuf acturing environment.  Team working spirit, management involvement, total design process and integration of IT tools are still the essence of CE.  The application of The CE process to the design of an injection process involves the simultaneous consideration of plastic part design, mould design and injection moulding machine selection, production scheduling and cost as early as possible in the design stage.
    This paper presents the basic structure of an injection mould design. The basis of this system arises from an analysis of the injection mould design process for mould design companies.  This injection mould design system covers both the mould design process and mould knowledge management.  Finally the principle of concurrent engineering process is outlined and then its principle is applied to the design of a plastic injection mould.
    Keywords :Plastic injection mould design, Concurrent engineering, Computer aided engineering, Moulding conditions, Plastic injection moulding, Flow simulation
    1. Introduction
    Injection moulds are always expensive to make, unfortunately without a mould it can not be possible ho have a moulded product.  Every mould maker has his/her own approach to design a mould and there are many different ways of designing and building a mould. Surely one of the most critical parameters to be considered in the design stage of the mould is the number of cavities, methods of injection, types of runners, methods of gating, methods of ejection, capacity and features of the injection moulding machines.  Mould cost, mould quality and cost of mould product are inseparable.
    In today’s completive environment, computer aided mould filling simulation packages can accurately predict the fill patterns of any part. This allows for quick simulations of gate placements and helps finding the optimal location. Engineers can perform moulding trials on the computer before the part design is completed. Process engineers can systematically predict a design and process window, and can obtain information about the cumulative effect of the process variables that influence part performance, cost, and appearance.
    2. Injection Moulding
    Injection moulding is one of the most effective ways to bring out the best in plastics. It is universally used to make complex, finished parts, often in a single step, economically, precisely and with little waste.  Mass production of plastic parts mostly utilizes moulds.  The manufacturing process and involving moulds must be designed after passing through the appearance evaluation and the structure optimization of the product design. Designers face a huge number of options when they create injection-moulded components. Concurrent engineering requires an engineer to consider the manufacturing process of the designed product in the development phase. A good design of the product is unable to go to the market if its manufacturing process is impossible or too expensive.  Integration of process simulation, rapid prototyping and manufacturing can reduce the risk associated with moving from CAD to CAM and further enhance the validity of the product development.
  1. 上一篇:计算机辅助机械设计英文文献和中文翻译
  2. 下一篇:注塑模的收缩位移点英文文献和翻译
  1. 数字通信技术在塑料挤出...

  2. 注射成型薄壁注塑翘曲英文文献和中文翻译

  3. 3D注塑模具设计系统英文文献和中文翻译

  4. 基于网络的注塑模具智能...

  5. 注塑模具内流道压力与型...

  6. 汽车挡泥板注塑成型中能...

  7. 塑料注射成型工艺参数优...

  8. g-C3N4光催化剂的制备和光催化性能研究

  9. 中国传统元素在游戏角色...

  10. 高警觉工作人群的元情绪...

  11. NFC协议物理层的软件实现+文献综述

  12. 上市公司股权结构对经营绩效的影响研究

  13. 巴金《激流三部曲》高觉新的悲剧命运

  14. 江苏省某高中学生体质现状的调查研究

  15. C++最短路径算法研究和程序设计

  16. 现代简约美式风格在室内家装中的运用

  17. 浅析中国古代宗法制度

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回