菜单
  
    摘要:外墙外保温火灾发生后,窗口成为火焰进入室内的通道并提供大量的空气,可能导致室内发生轰然。为了研究高层住宅窗墙比对火势的蔓延速率、火场温度、烟气蔓延程度和一氧化碳浓度变化的影响,本文采用了场模拟软件FDS (Fire Dynamics Simulator),模拟了不同窗墙比情况下的住宅外墙外保温火灾,分析得到窗墙比增大后,火灾蔓延速率变快,蔓延范围增大,但峰值温度降低。模拟结果表明,起火面窗墙比为0.25时燃烧剧烈,引起轰然,形成瞬间高温;起火面窗墙比为0.35 时,因为对流加强,热损失增大,温度降低。本文的研究成果可为高层住宅外保温层火灾安全设计和管理提供有益的参考。24073
    毕业论文关键词:窗墙比;高层住宅;外墙外保温火灾;FDS;烟气蔓延
    Research on Impact of High-rise residential Exterior insulation Fire with Different Window-Wall Ratio
    Abstract:The fire of external wall insulation, windows into the flame into the interior of the channel and to provide a large amount of air, can cause indoor crashing. In order to spread of high-rise residential window wall ratio, the effect of temperature, rate of fire smoke spreading and carbon monoxide concentration changes, the field simulation software FDS (Fire Dynamics Simulator), the simulation of different window wall ratio in the case of the residential exterior insulation fire, analysis by the window wall ratio increases, the fire spread rate faster, spread range increases, but reduce the peak temperature. The simulation results show that, the fire side window wall ratio is 0.25 when burning, caused by crashing, formation of instantaneous high temperature; fire area ratio of window to wall is 0.35, because the convection heat loss increases, strengthen, lower temperature. To provide the beneficial reference layer of fire safety design and management of the research results of this paper can be for high-rise residential exterior insulation.
    Key words: Window-wall Ratio, High-rise Residential Building, Exterior Insulation Fire, FDS,The spread of smoke
    目录
    1.绪论    1
    1.1 课题研究背景和意义    1
    1.2 国内外研究现状    1
    1.3 本文的研究内容和方法    3
    2. 高层建筑火灾分析的理论基础    5
    2.1 火灾动力学基础    5
    2.2.1火灾发展过程    5
    2.1.2火灾发展机理    5
    2.1.3火源参数及其确定方法    6
    2.2 FDS数值模拟理论及方法    9
    2.2.1FDS软件简介    9
    2.2.2FDS数值模拟的理论基础    9
    2.2.3主要参数设置    10
    2.3 高层建筑外保温层火灾特点    12
    2.3.1火灾发生率高    12
    2.3.2火势蔓延快    12
    2.3.3疏散困难    12
    3. 高层住宅外保温层火灾数值模拟实验    14
    3.1 模型的建立    14
    3.2 实验方案及参数设计    14
    3.2.1网格划分    14
    3.2.2火源    14
    3.2.3环境条件设置    15
    3.3 火灾场景设计    15
    4. 模拟结果分析    16
    4.2 不同窗墙比下起火面各楼层测点温度变化曲线    21
    4.3 不同窗墙比下非起火面各楼层测点温度变化曲线    23
    4.3不同窗墙比下各切面烟气变化图    24
    4.4不同窗墙比下各切片一氧化碳浓度变化    27
    4.5窗墙比对高层住宅外保温层火灾发展影响综合分析    28
    5 结论和展望    30
    致谢    31
  1. 上一篇:深圳地铁一号线续建工程变形监测分析
  2. 下一篇:地铁隧道工程的施工组织设计
  1. FDS火灾模拟的汽车油漆车...

  2. FDS某汽车总装车间汽油加...

  3. FDS排烟口设计对火灾抑制的效果分析

  4. FDS高层建筑体型对室外风...

  5. 建筑火灾烟气的FDS模拟研究+文献综述

  6. 江苏省某高中学生体质现状的调查研究

  7. 现代简约美式风格在室内家装中的运用

  8. NFC协议物理层的软件实现+文献综述

  9. 浅析中国古代宗法制度

  10. C++最短路径算法研究和程序设计

  11. 巴金《激流三部曲》高觉新的悲剧命运

  12. 中国传统元素在游戏角色...

  13. 高警觉工作人群的元情绪...

  14. g-C3N4光催化剂的制备和光催化性能研究

  15. 上市公司股权结构对经营绩效的影响研究

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回