光纤激光准直出射系统研究
关键词 光纤激光器 高斯光束 激光准直 光束整形
毕业论文设计说明书外文摘要
Title Research of fiber laser collimation system
Abstract
With the wide application of fiber laser in the field of industry and military, the requirement for the collimation of laser beam is higher and higher. But the output beam of fiber laser is non collimated light, it must be collimated by collimation system to meet the demand; at the same time, the Gaussian intensity distribution limits its application, it can be transformed into Top-hat beam by beam shaping units. In this paper we studied the collimating and shaping system for fiber laser, as follows: first we designed the original structure, the modeling simulation and optimization was processed with optical design software according to elimination of aberration. The designed collimation system can meet the requirements of four wavelength laser collimation, the analysis shows that the output beam wavefront aberration is small, the accuracy of collimation is high, and the energy is well focused. Then based on both optical and thermal performance, the collimator mechanical structure was designed. At last we studied the Gaussian beam shaping design method and use the relevant software for verification.
Keywords Fiber laser Gaussian beam collimation beam shaping
目 次
1 引言 1
1.1 研究背景 1
1.2 激光整形方法 1
1.3 本文内容与结构 3
2 相关理论 4
2.1 高斯光束的性质 4
2.2 高斯光束的变换 4
3 准直器光学设计 9
3.1 设计目标 9
3.2 准直系统光路分析 9
3.3 ZEMAX优化与分析 10
4 准直器机械结构设计 17
4.1 准直单元设计 17
4.2 光纤连接器 19
5 基模高斯光束整形 21
5.1 整形系统设计方法 21
5.2 基于ZPL的自动优化设计 22
结 论 26
致 谢 27
参考文献28
1 引言
1.1 研究背景
激光是20世纪以来人类的又一伟大发明。目前激光技术正在全球范围内获得越来越广泛的应用。而近年来光纤激光器在由于本身的优点，受到了广泛的关注，得到了飞速的发展。与传统的激光器相比较，光纤激光器具采用固体结构，稳定性与可靠性强；同时，光纤激光器输出的激光不仅光束质量好,而且稳定；而且光纤激光器工作物质为掺杂光纤，可进行盘绕，有效缩小了激光器体积，并且利于散热。加上其能量转换效率高的优点，光纤激光器在通讯、医疗、工业、军事等场合获得了更加广泛的应用[1]。尤其是光纤激光器由光纤出光，其光纤柔软可弯曲盘绕的特性便于激光传输，非常适用于激光加工和激光武器领域。
下一篇：ZnCuO变温拉曼光谱的分析