-
摘要飞速发展的科学技术，使小规模的集成遥控已无法满足现代工业的需求，新型的大规模集成遥控的出现，也带动着遥控器飞速发展的步伐。在一些环境恶劣、干扰性强或是需要远距离操控的大型工业现场，一般的如红外、光控、蓝牙甚至低频无线电传输遥控器等，可靠性已达不到所需的要求。如何解决这些问题将是工业遥控器发展的方向和关键所在。34566
- 上一篇：脉冲耦合神经网络的图像滤波+源程序
- 下一篇：PLC机械臂装配搬运系统设计+梯形图+源程序
针对工业现场远距离传输和执行情况反馈等要求，设计了基于STC89C52单片机为核心的无线电工业遥控器，以按键输出控制信息，NRF24L01无线收发模块进行2.4GHZ高频无线收发，利用ULN2003模块驱动大电压，实现了单片机输出电压的放大，为下位机的继电器控制提供了基础。通过LCD显示应答反馈信号，来实现一对一双向通信。
2.4GHZ是NRF24L01的频段收发范围，高频率的射频保证了其抗干扰性，也保证了较长的传输距离。同时30台遥控器在一起也不会产生相互干扰的问题，为工业现场的抗干扰性提供了保障。本设计是基于单片机的无线遥控器，在对一些需求进行功能分析和技术改进的同时，也根据实际情况作了系统调试。以上都将在本文中详细介绍。
毕业论文关键词： 无线遥控器 反馈显示 STC89C52单片机 NRF24L01
Abstract
The rapid development of science and technology, small-scale integrated remote control has been unable to meet the needs of modern industry, the new emergence of large-scale integrated remote control, also contributed to the pace of the rapid development of the remote control. In some of the harsh environment, strong interference or need remote control of a large industrial site, in general, such as infrared, light control, Bluetooth and even low-frequency radio transmission remote control, reliability has reached less than the requirements needed. How to solve these problems will be the direction of industrial development and the remote control key.
For industrial site and the implementation of long-distance transmission feedback, etc., designed based on STC89C52 as the core of the radio industry remote control to key output control information, NRF24L01 wireless transceiver module 2.4GHZ frequency wireless transceiver, use ULN2003 to drive large voltage module to achieve a single-chip output voltage amplification, the next crew to the relay control provides the foundation. LCD display by answering feedback signal, to achieve one-way communication.
2.4GHZ band transceiver is NRF24L01 range, high-frequency radio to ensure its interference, but also to ensure a longer transmission distance. While 30 remote control does not cause problems with mutual interference immunity for industrial site to provide a guarantee. The design is based on single chip wireless remote control, in some of the demand for functional analysis and technical improvements, but also made the system debugging according to the actual situation. All of the above will be described in detail herein.
Keyword： Wireless remote control Feedback show STC89C52 microcontroller NRF24L01
目录
摘 要 I
Abstract II
1 绪论 1
1.1 课题研究背景及意义 1
1.2 工业遥控器国内外发展现状和趋势 1
1.3 主要工作安排 2
2 系统总体设计方案 4
2.1功能需求分析 4
2.2 工业遥控器的设计框图 4
2.3 主要模块介绍 5
3 系统硬件设计 7
3.1 硬件选择 7
3.2 电源模块电路 13
3.3 微控制器模块电路 14
3.4 LCD显示模块电路 17
-
stc15单片机水温水压无线监...
-
PIC16F73单片机逆变电源硬件电路设计+电路图
-
51单片机永磁直流无刷电动机驱动控制器设计
-
Arduino单片机车载太阳能空气净化器设计
-
AT89C51单片机的无线环境监测装置设计+程序
-
STC15W404AS单片机太阳能自动浇花器的设计
-
PIC18F4520单片机水下机器人...
浅析中国古代宗法制度
C++最短路径算法研究和程序设计
NFC协议物理层的软件实现+文献综述
g-C3N4光催化剂的制备和光催化性能研究
现代简约美式风格在室内家装中的运用
高警觉工作人群的元情绪...
中国传统元素在游戏角色...
上市公司股权结构对经营绩效的影响研究
江苏省某高中学生体质现状的调查研究
巴金《激流三部曲》高觉新的悲剧命运