- 上一篇：220kv变电站工程造价分析与计算
- 下一篇：开关电源的原理和设计
摘要：温度的测量与我们的生活和生产应用是息息相关的，而掌握精准的温度测量参数便显得尤为重要。尤其是科研、制造工业农业及人体温度测量方面的的应用，更需要我们重视。现有的接触式温度计不仅测量不够精准，测量时间较长，而且还存在一些安全隐患，所以随着科学生产技术不断向前迈进，新型的红外测温技术，很好的弥补了传统式温度计的不足。在本论文中，就目前国内的红外测温仪器的发展状况，尤其是医用水银温度计的现状，提出以STC89C51单片机作为整个仪器的核心部件，操控整个仪器，利用OTP-538U热电堆传感器测量温度，这种传感器是一种非接触式传感器，通过放大传送送到A/D模块中，再用A/D模块改成数字信号之后转达到STC89C51上。由单片机负责温度测量、接收信号、并算出被测物体温度，再通过LCD显示器显示数据结果。本文中所研究的温度测量仪是一种新型的非接触式传感器，不用直接与被测物接触，而且测量时间比接触式温度计短，精度和稳定性都比接触式的好，且不容易损坏，便于携带，成本低且不会产生危害，因此具有良好的市场前景。48748
毕业论文关键词： STC89S51单片机; OTP-538U; 红外测温
Design of Portable Infrared temperature measurement system
Abstract: The measurement of temperature is closely related to our life and production, and it is very important to master the accurate temperature measurement parameters. In particular, the application of scientific research, manufacturing industry, agriculture and human body temperature measurement, we need to pay more attention to. Existing contact thermometer can measure not only is not enough accurate, long time of measurement, but also the existence of some of the security hidden danger, so with scientific production technology continues to move forward, model of infrared temperature measurement technology, a good make up the deficiency of the traditional thermometer. In this paper, the development status of the infrared temperature measurement instrument, especially the status of the medical mercury thermometer, proposed to STC89C51 micro controller as the core components of the instrument, control the whole instrument, using OTP-538U THERMOPILO sensor to measure temperature, the transmission sensor is a kind of non-contact sensor. By amplifying transmission is sent to a / D module, then by the A / D module into digital signals are transmitted to the main chip STC89S51. The micro controller is responsible for the temperature measurement, the receiving signal, and calculate the temperature of the measured object, and then display the results of the data through the LCD display. This paper studies the temperature measuring instrument is a new non contact type sensor, without directly with the measured contact, and the measuring time is shorter than the contact thermometer, precision and stability than the contact of the good and is not easy to damage, easy to carry, low cost and no harm, so it has good market prospects.
Key Words: The STC89C521 MCU;LOTP-538U; Infrared temperature measurement
目 录
摘 要 1
引言 2
1.红外测温系统概述 2
1.1红外测温系统研究现状 2
1.2 红外测温系统的特点 3
1.3红外测温原理 3
2.便携式红外测温系统系统设计方案 5
2.1设计主要工作 5
2.2总体设计和主要内容 5
3.系统硬件设计 6
-
stc15单片机水温水压无线监...
-
PIC16F73单片机逆变电源硬件电路设计+电路图
-
51单片机永磁直流无刷电动机驱动控制器设计
-
Arduino单片机车载太阳能空气净化器设计
-
AT89C51单片机的无线环境监测装置设计+程序
-
STC15W404AS单片机太阳能自动浇花器的设计
-
PIC18F4520单片机水下机器人...
现代简约美式风格在室内家装中的运用
g-C3N4光催化剂的制备和光催化性能研究
中国传统元素在游戏角色...
浅析中国古代宗法制度
NFC协议物理层的软件实现+文献综述
上市公司股权结构对经营绩效的影响研究
江苏省某高中学生体质现状的调查研究
C++最短路径算法研究和程序设计
巴金《激流三部曲》高觉新的悲剧命运
高警觉工作人群的元情绪...