摘要随着世界能源的紧缺越演越烈，以及温室效应带来的全球变暖问题，使得生物质能源作为一种既古老又新型的洁净能源正在为人们所利用。生物质成型燃料的燃烧作为生物质能源高效利用的一种目前主要有颗粒、块状和棒状燃料三种形式。这些燃料由于成型过程能耗大，设备磨损严重限制了其利用。本文是探求一种新型生物质草棒燃料致密化的路径，通过从成型机理、成型技术和生产过程的经济性角度，与颗粒燃料、块状燃料和棒状燃料进行比较。然后具体对草棒燃料的生产过程的技术进行优化，努力提高产品的机械强度和堆积密度、降低生产成本。最后从燃烧特性和设备角度，分析每种生物质成型燃料的腐蚀、积灰和结渣特性，以及所需的具体燃烧设备和形式。64348

毕业论文关键词 : 生物质成型燃料 ; 成型技术 ; 经济性分析 ;  堆积密度 ; 燃烧特性

 毕业设计说明书（论文）外文摘要

Title  A new kind process of the staw and the experiment of its performance                                              

Abstract With the lacking of energy and the increasing of greenhouse gas which leads to the global warming ,the utilization of biomass is developing under the instruction of Energy saving and environmental protection  . As one of the efficient utilization of biomass , the biomass moudlding fuel generally presents as granular fuel , block fuel and rod fuel.Because the processes need lots of energy and cause great friction ,which limits the fully use of them . The study now pursues a new kind of process which makes the moudlding fuels through twisting the straw . Firstly, this new kinds of fuels was compared with the traditional fuels from the moudlding principle , technology and economics . Secondly , in order to improve the intensity and density as well as to minimize the costs , some defects during the processes has been founded and  some ways were used to get rid of those to realise the  optimization. lastly , the combustion equipments and performance of the fuels were analysed . based on the performance of ash corrosion ,deposition and slagging ， the corresponding equipments for the combustion has been chosen .

Keywords:  biomass moudlding fuel ; Moldlding technology  ;  Economic analysis ; Stacking density ;  Combustion performance

 1 绪论 1

1.1 生物质成型燃料的研究目的和意义 1

1.2 生物质秸秆利用现状及产业发展 1

1.2.1 生物质秸秆利用现状及产业发展 1

1.2.2 生物质秸秆的资源分布和发展前景 2

1.2.3 生物质成型燃料的技术和产业发展 4

1.2.4 生物质燃料与传统燃料的经济性比较 5

1.3 本论文研究的内容和燃料性能介绍 5

1.4 生物质成型燃料国内外标准及其必要性 6

1.4.1 构建生物质成型燃料标准的必要性 6

1.4.2 国际上有关生物质成型燃料的标准 6

1.4.3 国内关于生物质成型燃料的标准 8

2 传统生物质燃料成型机理和影响因素 9

2.1 生物质成型燃料的机理 10

2.1.1  生物质成型需要的基本条件 集束扭转成型燃料制备与性能测试:http://www.youerw.com/zidonghua/lunwen_71471.html