毕业论文

当前位置: 毕业论文 > 外文文献翻译 >
  • 油船航运业英文文献和中文翻译

    Oil Tanker shipping Industry Introduction: The oil shipping industry is one of the biggest gambles now days. Big players in this field are making fortunes or losing their life savings. The decisions are based on intuition and previous exper...

  • 注塑模具的设计及其热分析英文文献和中文翻译

    摘要:本文介绍注塑模具设计生产翘曲测试样本以及为了获得残余热应力的影响,在模具中执行热分析。这项技术、理论、方法在注射模具设计中必须被考虑运用。 在商业计算机上使用...

  • 注塑模具设计英文文献和中文翻译

    摘要对于模制件,包括产品模型的侧凹特征和自由曲面,提出一种自动确定分型线的新方法。这个简短的过程包括:1)通过识别侧凹特征和应用有限元的方法将产品实体模型转换成离散...

  • 波士顿托宾纪念大桥的结构建模英文文献和中文翻译

    ABSTRACT This paper describes analytical structural models created for various components of the Tobin Memorial Bridge, and a program of instrumentation and non-destructive testing for the Little Mystic Span. A detailed global finite element...

  • 连续模弯曲顺序英文文献和中文翻译

    Abstract In progressive dies, two or more stations are usedto produce sheet metal components. In each station, one ormore processes are applied. The progressive dies reduce thetime and cost of producing complex sheet metal com-ponents. Howev...

  • 抗侧向荷载的结构体系英文文献和参考文献

    Structural Systems to resist lateral loads Commonly Used structural Systems With loads measured in tens of thousands kips, there is little room in the design of high-rise buildings for excessively complex thoughts. Indeed, the better high-r...

  • 预制板的连续组合双肋桥的裂缝控制英文文献和中文翻译

    AbstractIn this study, an experimental test on a full-scale model of a two-span continuous composite two-girder bridge with prefabricated slabs wascautiously conducted and observed in order to study crack control. In the testing, a first lo...

  • CAD知识的模具设计英文文献和中文翻译

    This paper presents a practical prototype knowledge-basedsystem, called IKMOULD, for mould design in the injectionmoulding process. It attempts to tackle the problem in apractical and integrative way, unlike the stand-alone andmathematical p...

  • 复杂级进模冲压件毛坯设计英文文献和中文翻译

    A multi-step unfolding method (MSUM) is developed for blank design and formability pre-diction of complicated progressive die stamping part. In themethod, a finite elementmodelof the inverse approach (IA) is developed at a local area accord...

  • 动态特征测量系统英文文献和中文翻译

    如果输入信号Ito元素是突然变了,从一个到另一个值,然后输出信号不会瞬间改变其新值。为例子,如果温度输入热电偶突然改变从25C到100C,之前一段时间会流逝e.m.f.输出完成改变1 mV 4 mV。...

  • 首页
  • 上一页
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 下一页
  • 末页
  • 1341337