摘要本设计主要进行了结构方案中横向框架的结构设计。在确定框架布局之后，先进行了层间荷载代表值的计算，接着利用经验公式求出自震周期，进而按底部剪力法计算水平地震荷载作用下大小，进而求出在水平荷载作用下的结构内力（弯矩、剪力、轴力）。同样的过程计算风荷载作用下的结构内力。接着计算竖向荷载（恒载及活荷载）作用下的结构内力，找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。其次还进行了结构方案中的楼梯的设计。完成了平台板，梯段板，平台梁等构件的内力和配筋计算及施工图绘制。此外还进行了基础梁和基础的设计，完成了基础的平面布置和配筋计算，并完成了基础的施工图绘制。51231
ABSTRACT The purpose of the design is to do the structure design in the lateral frames of axis . When the directions of the frames is determined，firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by empirical equation method，then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment，shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads，the combination of internal force can be made by using the Excel software，whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders，which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab，step board and landing girder whose shop drawings are completed in the end.
Keywords: Frame structure; Architectural design; Structural design; Anti-seismic design
目 录
第一章 设计概况 1
1.1 建设项目名称 1
1.2 建设地点 1
1.3 设计资料 1
第二章 结构计算书 2
2.1 结构布置方案及结构选型 2
2.1.1 结构承重方案选择 2
2.1.2 主要构件选型及尺寸初步估算 2
2.1.2.1 主要构件选型 2
2.1.2.2 梁﹑柱截面尺寸估算 2
2.1.3 确定结构计算简图 3
2.2 荷载统计 3
2.2.1 恒载标准值 3
2.2.2 活载标准值 5
2.2.3 风压标准值 5
2.2.4 雪荷载标准值 6
2.2.5 地震作用 6
2.3 荷载计算 6
2.3.1 恒荷载标准值 6
2.3.2 活荷载标准值 6
2.3.3 风荷载标准值 8
2.3.4 地震作用标准值 10
2.4 荷载作用下框架的内力分析 六层钢结构教学楼设计+CAD图纸:http://www.youerw.com/gongcheng/lunwen_54791.html