毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

基质浓度CuⅡ和HRT对厌氧氨氧化系统的单独与联合效应

时间:2021-08-23 19:46来源:毕业论文
基质和水力冲击影响由厌氧氨氧化活性(SAA)体现,SAA最大损失率分别为51.9%和63.6%。 基质和水力冲击的联合效应抑制SAA,而重金属和水力冲击结合对SAA无严重影响

摘要厌氧氨氧化系统在实际应用中会受到基质浓度波动、水力负荷增大和重金属元素的单独或联合效应影响 。因此,为了解这种系统的稳定性和应变性,用上流式厌氧污泥床(UASB)反应器进行基质浓度为稳定运行浓度的1.5倍和2.0倍,HRT为稳定运行时的2 / 3倍和1/2倍,以及Cu(Ⅱ)浓度为5.95mg/L和12.9mg/L,单独或联合进行持续时间为2到4 小时的冲击反应试验。不同的冲击反应试验,厌氧氨氧化系统的脱氮效率的差异很大。联合冲击对系统影响的大小顺序是:(基质冲击+水力冲击)>(基质冲击+重金属冲击)>(水力冲击+重金属冲击)。基质和水力冲击影响由厌氧氨氧化活性(SAA)体现,SAA最大损失率分别为51.9%和63.6%。 基质和水力冲击的联合效应抑制SAA,而重金属和水力冲击结合对SAA无严重影响。因此,该系统表现出相当大的弹性能承受一定的冲击强度。71151

Factors such as substrate fluctuations, increased inflow rates and heavy metal presence exert inpidual and combined effects on anaerobic ammonium oxidation (anammox) systems in real applications; therefore, the performance stability and resilience of such systems were investigated in an upflow anaerobic sludge blanket (UASB) reactor. A 1.5- and 2.0-fold increase in substrate concentration, 2/3- and 1/2-fold decrease in hydraulic retention time (HRT), and 5.95 and 12.9 mg L 1 transient Cu(II) shock were applied either inpidually or in combination for durations of 2 and 4 h. The nitrogen removal efficiency of the system varied considerably when all of the shocks were applied. The magnitude of the effect of the com- bined shock loads on the system decreased in the following order: (substrate shock + hydraulic shock) > (substrate shock + heavy metal shock) > (hydraulic shock + heavy metal shock). The specific anammox activity (SAA) was adversely affected by the inpidual substrate and hydraulic shocks, with maximum SAA loss rates of 51.9% and 63.6%, respectively. The SAA was inhibited by the substrate and hydraulic shock combination, whereas it was not strongly affected by the heavy metal and hydraulic shock combi- nation. Thus, the system could withstand certain shock intensities and exhibited considerable resilience.

毕业论文关键词:厌氧氨氧化; 基质冲击; 重金属冲击; 水力冲击; 联合冲击

Key words:  Anammox ;Substrate shock ;Heavy metal shock; Hydraulic shock ;Combined shock

目录

目录 3

引言 4

1.材料和方法 4

1.1模拟废水和接种菌 4

1.2厌氧氨氧化反应器和试验策略 4

1.2.1稳态试验 4

1.2.2基质冲击试验 5

1.2.3重金属冲击试验 5

1.2.4水力冲击试验 5

1.2.5联合冲击测试 5

1.2.6试验步骤 5

1.3 SAA测定 5

1.4分析数据 5

2.结果与讨论 6

2.1.不同冲击条件下厌氧氨氧化反应器的性能 6

2.1.1.单独冲击试验 6

2.1.1.1.基质冲击试验。 6

2.1.1.2.重金属(Cu(Ⅱ))冲击试验。 7

2.1.1.3.水力冲击试验。 7

2.1.2 联合冲击试验 基质浓度CuⅡ和HRT对厌氧氨氧化系统的单独与联合效应:http://www.youerw.com/huaxue/lunwen_80730.html

------分隔线----------------------------
推荐内容