摘要行星传动具有结构紧凑、尺寸小、重量轻、传动质量高等特点，载荷一般分布在多个行星齿轮上使每对相互啮合轮齿的受力减小。而齿轮副正确啮合条件为啮合线上的法节相等，在设计NGW 型行星轮系时，可将太阳轮、行星轮和内齿轮的模数与压力角设计成互不相等的情况，这种内、外啮合副采用非等模数非等压力角的灵活设计，可以增加内外啮合副的重合度，综合地提高齿轮的承载能力，同时还可以使传动更为平稳。虽然其加工成本较高，但对于航空传动方向有着重要的应用价值。NGW行星齿轮的设计与虚拟装配结合，本文选用通用三维软件Solid Works对双模数齿轮进行零部件的设计、装配、齿轮啮合的干涉检查、运动仿真等，真实再现了齿轮之间的啮合过程。该技术的运用，在很大程度上缩短了产品的研发周期，同时能对产品进行制造前的检查，节省大量的人力、物力，增强了产品竞争能力。49552
毕业论文关键词：行星传动；双模数；三维建模；虚拟装配与仿真
Abstract
Planetary transmission with compact structure, small size, light weight, high quality transmission, base, and the load distribution in general more than one planet gear to make every to mesh with each other reducing stress of gear tooth. And gear pair meshing conditions for meshing line correct the law's day equal, in design and NGW modeled planet gear, but will the sun, planets round and round in the gears of the modulus and pressure Angle into each other is not equal to the design, the internal and external meshing vice, adopts the etc the modulus of pressure Angle of flexible design, can increase the meshing pair of inside and outside of coincidence degree, comprehensively improve the bearing capacity of the gear, also can make the drive more smoothly. Although the processing cost is higher, but for aviation transmission direction has important application value. The design of the planetary gear and NGW virtual assembly union, this paper choose general 3 d software Solid Works on the double modulus gear parts design, assembly, the gearing mesh of interference, motion simulation, truly represent the gear meshing process between. The use of this technology, to a great extent, shorten the product development cycle, also can make the product before the check, save a lot of manpower and material resources, to enhance the product competition ability.
Keywords：planetary gear transmission；unequal modulus and pressure angle；3D modeling；The virtual assembly and simulation
目录
第一章 绪论 11
1.1行星齿轮系统的原理 11
1.2行星齿轮系统的优缺点 11
1.3行星齿轮系统的发展 12
1.4 Solid Works软件介绍 13
第二章 双模数行星齿轮的研究 15
2.1渐开线直齿圆柱齿轮副的几何尺寸 15
2.2双模数星齿轮系的几何尺寸 17
2.3齿根圆尺寸的计算 17
2.4齿顶圆尺寸的计算 18
2.5实例 19
2.6结论 20
第三章 双模数行星齿轮的装配 22
3.1虚拟现实技术与虚拟装配技术 22
3.1.1虚拟现实技术 22
3.1.2虚拟装配技术 23
3.2虚拟装配的方案与步骤 SolidWorks双模数行星齿轮系统的建模和虚拟装配方法研究+CAD图纸+答辩PPT:http://www.youerw.com/jixie/lunwen_52569.html