摘要本工程为特迪克综合楼，总体五层局部六层框架结构，底层层高为3.6m，标准层层号为3.3m，总高度为20.1m。建筑总面积约5000平方米。经过方案论证，我们决定结构采用纵横向承重方案。因为该工程抗震设防烈度为7度，所以不考虑竖向地震作用。本设计主要进行了结构方案中横向框架2-9轴框架的抗震设计。在确定了框架布局后，首先进行了层间荷载代表值的计算,然后运用顶点位移法等求出自震周期，之后按底部剪力法计算水平地震荷载作用下大小，接着求出在水平荷载作用下的结构内力（包括弯矩、剪力、轴力），然后计算竖向荷载（恒载及活荷载）作用下的结构内力，找出最不利的一组或几组内力组合。选取最安全的结果计算配筋并绘图。除此外之还进行了结构方案中的室内楼梯的设计。完成平台板，梯段板，平台梁等构件的内力和配筋计算及施工图绘制。52362
毕业论文关键词：框架; 结构设计; 抗震设计
Abstract The purpose of the design is to do the anti-seismic design in the longitudinal frames of axis 2、3、7、8. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders, which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab, step board and landing girder whose shop drawings are completed in the end.
Keywords : frames, structural design, anti-seismic design
目 录
第一章 绪论1
第二章 工程概况2
第三章 梁、柱截面尺寸的初步确定 4
3.1梁截面高度一般取梁跨度的1/12至1/84
3.2框架柱的截面尺寸根据柱的轴压比限值4
3.3计算过程 4
第四章 框架侧移刚度的计算6
4.1横梁线刚度i b的计算6
4.2纵梁线刚度I b的计算6
4.3柱线刚度i c的计算I=bh3/126
4.4各层横向侧移刚度计算 (D值法)6
4.4.1底层6
4.4.2二—六层8
4.5各层纵向侧移刚度计算10
4.5.1底层10
4.5.2二—六层11
第五章 重力荷载代表值的计算14
5.1资料准备14
5.2重力荷载代表值的计算14
5.2.1梁柱计算14
5.2.2内外填充墙计算18
5.2.3窗户计算19
5.2.4楼板恒载活载计算20
5.3每层重力荷载代表值21
第六章 横向水平荷载作用下框架结构的内力和侧移计算22
6.1横向自振周期的计算22
6.2水平地震作用及楼层地震剪力的计算23
6.2.1结构等效总重力荷载代表值23
6.2.2计算水平地震影响系数23
6.2.3结构总的水平地震作用标准值23
6.3多遇水平地震作用下的位移验算24
6.4水平地震作用下框架内力计算25
6.4.1框架柱端剪力及弯矩计算25
6.4.2梁端弯矩剪力及柱轴力计算27 总体五层局部六层框架结构设计+CAD图纸:http://www.youerw.com/jixie/lunwen_56220.html