菜单
  
    摘要:本论文通过使用比容差法,对钢钉和水泥这两种材料在亚稳态转变时的比容进行研究,得到了精确的数据。由此我们可以得到亚稳态材料在向稳态变化的过程中的定量描述:首先,由钢钉的测量可以得到钢铁材料加工硬化后的密度的变化,即钢钉加工硬化后与此钢退火后的平衡态进行比较其比容减小了0.2-0.5%。同时我们对其进行了硬度试验,以此映证了比容差法的可行性;其次,验证了材料的间接比容分析方法,结果表明此法可行,但存在一定误差。最后测量了水泥(混凝土)凝结过程的密度的变化,结果表明凝固过程中密度将变化5.8-6.0%即定性的证明了此法有效,为今后此法的进一步研究提供了基础。28557
    毕业论文关键字:亚稳态;比容;比容差法;相转变
    The study on the specific volume of transition about metastable materials
    Abstract:This paper by using compare the difference of specific volume, steel nails and cement the two materials in the metastable changes the volume of research, have an accurate data.So we can get in metastable materials quantitative description of changes in steady-state process: First, by measurement of the nail can be changes in density after the work hardening of steel materials, the nail after the work hardening after annealing of steel with this equilibrium State compared to its volume reduces the 0.2-0.5%. While we make the hardness test, the feasibility of this video card than the tolerance method; second, verify the indirect method for hematocrit analysis of materials, the results show that this method is feasible, but there are some errors. Finally,measurement of cement (concrete) condensation density changes shows changes in density during solidification 5.8-6.0% qualitative proved effective, provided the basis for the further study of this method in the future.
    Keywords: Metastable; volume; volume difference ; phase change
    目  录

    1 绪论    1
    1.1 材料简介    1
    1.1.1 钢的概述    1
    1.1.2 钢的分类    2
    1.1.3 钢的热处理工艺    3
    1.1.4 水泥简述    7
    1.1.5 水泥的分类    8
    1.1.6 水泥的化学成分    9
    1.1.7 水泥凝固过程的化学反应    9
    1.2 亚稳态    10
    1.3 研究方法——比容差法    11
    1.4 选题的目的及意义    11
    1.5 课题研究问题    11
    2 实验内容、方法及实验设备    13
    2.1 热处理状态对材料比容的影响    13
    2.1.1实验设计    13
    2.1.2实验设备    14
    2.2显微硬度实验    16
    2.2.1 实验设计    16
    2.2.2 实验设备    17
    2.3 间接密度法    17
    2.3.1实验设计    17
    2.3.2实验设备    18
    2.4 水泥凝固过程中比容的变化    18
    2.4.1实验设计    18
    2.4.2实验设备    19
    3 实验结果及分析    20
    3.1  热处理状态对材料比容的影响    20
    3.2 显微硬度实验    22
    3.3 间接侧密度法    23
    3.4 水泥凝固过程比容的变化    24
    4 结 论    26
    致  谢    27
    参考文献    28
    1 绪论
    一直以来,材料都是人类赖以生存和发展的基础,在我们的生活和生产中处处都有着材料的身影。20世纪70年代,信息、材料和能源被人们认为是现在文明的三大支柱。80年代后,在经历了新技术革命后,人们把新材料、信息技术及生物技术认为是新技术革命的标志。这主要是因为材料在国民经济建设、国防建设和人民生活等方方面面都有着重要作用。
  1. 上一篇:含钴多元金属硫化物/N掺杂石墨烯复合物的制备及其性能
  2. 下一篇:高铬耐热钢微观组织与强韧化机制的研究
  1. 材料加工状态对铝合金搅...

  2. 铅离子印迹多孔材料制备及性能研究

  3. 石墨烯碳基复合材料制备及其传热特性研究

  4. 酞菁铜/石墨烯复合材料的制备及其性能研究

  5. 本体聚合法制备聚甲基丙烯酰亚胺泡沫板材

  6. 铬元素对铁铝基复合材料力学性能的影响

  7. 功能化碳纳米管对环氧树...

  8. 浅析中国古代宗法制度

  9. 上市公司股权结构对经营绩效的影响研究

  10. 高警觉工作人群的元情绪...

  11. C++最短路径算法研究和程序设计

  12. 中国传统元素在游戏角色...

  13. 现代简约美式风格在室内家装中的运用

  14. g-C3N4光催化剂的制备和光催化性能研究

  15. 巴金《激流三部曲》高觉新的悲剧命运

  16. NFC协议物理层的软件实现+文献综述

  17. 江苏省某高中学生体质现状的调查研究

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回