数控车床自动上下料机构上料及料台结构设计+CAD图纸
本文首先介绍了数控机床的概念，然后介绍了自动上下料上料机构的概念，接着介绍了上料机械手的组成和分类，机械手的自由度和座标形式，驱动方式等内容，确定了机械手的座标形式，自由度及驱动方案。之后分别设计了机械手的夹持式手部结构，机械手的手腕结构手腕回转结构，机械手腰部的升降结构及回转结构，并对其各部分的驱动液压缸做了计算确定了液压缸的内径，外径，及活塞杆的直径。最后介绍了料台的结构设计和驱动方式等。
毕业论文关键词：上料机械手；自由度；结构设计；三文造型
CNC lathe autotransmitting mechanism of feeding and discharging platformstructure design
Abstract：With the needs of the development of industrial automation , robots are more and more important in industrial applications .Industrial robots can replace manpower heavy labor , significantly reduced labor intensity of workers, improve labor productivity and the level of automation .It solves the handling of heavy artifacts often appears in industrial production and frequent, monotonous operation for a long time, but also improves the production speed of workpiece, so the use of the manipulator is very efficient, and to a feeding manipulator is designed in this paper.
This paper first introduces the concept of industrial robots, composition and classification of the manipulator, the degrees of freedom of the manipulator and the coordinates form, drive mode, etc.Then according to the technology of the manipulator overall design parameters on the manipulator was carried out, determine the coordinates of the manipulator type and degree of freedom and drive solutions.After that the holding type hand structure of the manipulator is designed, the structure of manipulator wrist wrist rotation structure, lifting structure and the structure of rotary manipulator waist, and the driving hydraulic cylinder of each part to do the calculation to determine the hydraulic cylinder inner diameter, outer diameter, and the diameter of the piston rod. Finally made related to the hydraulic system is introduced and the hydraulic system to do the simple design of the manipulator.
Keywords: mechanical hand,；degree of freedom；the structure design；hydraulic
目录
1 绪论 6
2文献综述 8
2.1国内外数控车床的发展 8
2.1.1国内数控车床的发展 8
2.1.2国外数控机床的发展 8
3课题的目的和意义 10
4上料机械手方案设计 11
4.1设计要求 11
4.2上料机械手整体结构方案 11
4.3运动简图与动作过程 11
4.4驱动方式的确定 13
4.5手部设计 15
4.5.1手部结构的选择 15
4.5.2手部力学分析 15
4.5.3定位误差的分析 16
4.6手部夹紧缸的设计计算 17
4.6.1 夹紧缸主要尺寸的计算 17
4.6.2缸体结构及验算 18
4.6.3油缸盖螺钉的计算 19
4.7.1 手臂设计要求 21
4.7.2手臂结构要求 21
4.7.3手臂伸缩运动结构设计 21