计量式柱塞泵密封结构分析+CAD图纸+答辩PPT
关键词: 柱塞泵；O形密封圈；填料环
Structure analysis of sealing metering plunger pump
Abstract: The plunger pump is an important means of the hydraulic system. It relies on the plunger reciprocates in the cylinder, so that the sealing capacity of the volume of the cavity changes to achieve Suction pressure oil. Piston pump rated pressure, compact structure, high efficiency, easy adjustment and flow, is widely used in high-pressure, flow and flow need to adjust the occasion, such as hydraulic machines, construction machinery and shipbuilding. There are gaps between the pump cylinder, the piston rod and gland leading fluid from leaked according to the test of experience, so they need to be sealed. The plunger pump of the subject uses O sealing ring and PTFE packing ring seal. The O-ring is installed in the groove, and on both sides of the O-ring is respectively with a snap ring in order to prevent O-ring extrusion gap toward the direction of the pressure from deformation resulting in failure under pressure. The inside of the stuffing box fitted with four PTFE packing rings whose material has good flexibility. Under the pressure force can be buffered, so that the biasing force of the O-ring is reduced to prevent a gap in the O-ring squeeze motion pair. O-ring installed on the end cap is multiple sealing of the pump structure in order to ensure its tightness.
KeyWords : Plunger pump; O sealing ring; Packing ring
目录
绪论 3
1 柱塞泵 5
1.1 柱塞泵的现状和发展 5
1.2 柱塞泵的主要参数 8
2 活塞杆的设计 10
2.1 滑动螺旋传动的设计 10
2.1.1 螺杆螺母材料的选取 11
2.1.2 按耐磨性计算螺杆中径 12
2.1.3 自锁性验算 13
2.1.4 螺杆强度验算 13
2.1.5 螺母螺纹强度验算 14
2.1.6 螺杆的稳定性验算 14
2.2 活塞杆的设计 15
2.2.1 活塞杆的强度校核 15
2.2.2 活塞杆的稳定性 17
2.3 导向套的设计 18
3 缸体的设计 20
3.1缸体壁厚的计算 20
3.2液压缸出口直径的设计 21
3.3缸底厚度的计算 22
3.4阀门的选择 22
4 密封结构 24
4.1 O形密封圈、挡圈及沟槽尺寸 24
4.1.1 沟槽和O形圈的尺寸 27
4.1.2 O形圈的公差尺寸 28
4.1.3 沟槽尺寸 29
4.2 软填料密封的设计 30
4.2.1 填料箱主要结构尺寸 31
4.2.2 压盖螺栓直径计算 31
上一篇：纸浆泵系列设计+CAD图纸