ABAQUS发动机托架的液压成形工艺设计及优化
本文的主要目的是对发动机托架的液压成形进行工艺设计，并以ABAQUS为分析平台，利用有限元数值模拟法，分析三个工艺参数对发动机托架成形过程的影响，进一步优化工艺。利用ABAQUS模拟分析，可以避免不必要的浪费，节省试验时间，进而为制定合理的工艺参数提供理论依据，为实现利用液压成形技术生产发动机托架打下基础。
关键词 发动机托架 预弯曲 液压成形 ABAQUS
毕业论文设计说明书外文摘要
Title The design and the optimization of the processing of engine bracket using hydroforming technology
Abstract
The hydroforming technology is an advanced processing technology to produce abnormal tubes. The technology uses high pressure liquid in pipe expanding in order to get the required fittings. The technology is widely used in the automotive industry to manufacture some light,high-strength tubular parts because of its flexibility in the design of product structure, good formability and its advantages of significantly reducing the number and the weight of parts, simplifying the manufacturing process and cutting the cost. Engine bracket is an important component of automobile. Researches on engine bracket using hydroforming technology are technically feasible, and are urgently needed in production.
The main purpose of this paper is to explore the design of engine bracket using hydroforming technology . ABAQUS is used as the analysis platform to analysis the influence of three parameters in the forming process on the engine bracket. The finite element numerical simulation method is used for further optimization. Using ABAQUS in simulation analysis can avoid unnecessary waste and save the testing time, which provides a theoretical basis for setting reasonable technological parameters and provides a foundation for the realization to use hydroforming technology in the production of engine bracket.
Keywords Engine bracket Prebending Hydroforming Abaqus
目 次
1 引言 1
1.1 液压成形技术 1
1.2 管件弯曲成形技术 2
1.3 金属塑性成形原理 5
1.4 发动机托架 5
1.5 研究目的和方法 6
2 弯管工艺设计及数值模拟 1
2.1 弯管工艺选择 1
2.2 弯管模型的建立 1
2.3 弯管工艺模型材料和截面属性的选择 2
2.4 弯管工艺模型网格的划分 3
2.5 弯管工艺模型的相互作用和边界条件的定义 4
2.6 弯曲成形结果分析 7
2.7 本章小结 8
3 液压成形工艺及数值模拟 9
3.1 合模 10
3.2 涨形工艺和模型 14
4 优化 18
4.1 优化目的 18
4.2 软件介绍 19
4.3 优化方法和步骤 20
4.4 本章小结 23
1 引言