摘要在Matlab软件环境下，开展了制导炮弹末制导律的仿真设计研究。建立二维平面和三维空间弹目相对运动方程，概述了制导炮弹制导控制系统的基本组成。
采用单一变量控制法分别仿真讨论存在随机初始扰动时三维无控炮弹落点的散布，并计算其落点圆概率偏差。建立二维比例导引模型，分析了比例系数对导引性能的影响。
分别基于落点预估法和传统比例导引法设计了三维空间攻击地面固定目标的末制导引律，以及攻击地面移动目标的传统比例导引律，应用相对速度比对比例导引系数进行修正从而建立一种新的比例导引律。通过仿真分析了考虑过载限幅和惯性延迟时上述四种末制导方案的弹道性能和命中精度。64271
毕业论文关键词 制导炮弹 落点预估法 传统比例导引 修正比例导引
毕业设计说明书（论文）外文摘要
Title The terminal proportional navigation simulation and design of the guided projectile
Abstract In the Matlab software environment,the terminal navigation law of the guided projectile was designed and simulated.Established the 2D and 3D relative motion equations about the guided projectile and the target.Outlined the basic composition of the navigation and control system of the guided projectile.The Single-variable control method was applied to discuss the 3D spread of uncontrolled projectile impact points when there were random initial perturbations and calculate the deviation.The 2D PN model was established to analyze the affect of the proportional coefficient for guiding performance.
Designed the terminal guidance law of 3D attacking the ground fixed target respectively based on the impact point predition method and the traditional PN,and the traditional PN of attacking the ground moving target,and applied the relative velocity ratio to modify the PN coefficient,so that established a new kind of PN.Through simulation to analysis the ballistic performance and shooting accuracy of the four terminal navigation scheme when considering the overload limiter and inertial delay.
Keywords Guided projectile Impact point predition method Traditional Proportional Navigation Modified Proportional Navigation
1 绪论 1
1.1 背景和意义 1
1.2 制导弹药研究现状 1
1.3 比例导引律在制导弹药中的应用 3
1.4 本文主要研究内容 5
2 制导炮弹运动模型及制导系统组成 7
2.1 制导炮弹常用坐标系 7
2.1.1 常用坐标系定义 7
2.1.2 常用坐标系间的转换关系 8
2.2 制导炮弹运动学方程 9
2.3 制导炮弹与目标相对运动关系 10
2.3.1 二维平面弹目相对运动关系 10
2.3.2 三维空间弹目相对运动关系 11
2.4 制导炮弹制导系统结构组成 14
2.4.1 导引头 15
2.4.2 自动驾驶仪 15
2.4.3 制导回路 16
2.5 本章小结 17
3 无控弹三维质点弹道仿真及散布分析 Matlab制导炮弹末段比例导引仿真设计:http://www.youerw.com/zidonghua/lunwen_71337.html