STC89C52单片机的射频密码锁设计+流程图

摘要密码锁系统在生活中已经越来越重要，所以，基于此实现了52单片机的智能密码锁系统。单片机是该密码锁系统的控制中心，键盘、射频卡的识别电路、蜂鸣器的提示电路、密码的存储电路、液晶显示等电路被加在了其外围。该设计中，进门之前必须先进行射频卡刷卡的动作。系统一旦开始工作，蜂鸣器会随着刷卡的同时发出声响，绿色指示灯在卡的权限获得了许可的情况下会点亮，指示灯在延后一段时间之后自动熄灭，红灯在卡的权限不匹配的情况下会亮起，蜂鸣器也同时会急促地响起。进入设置状态之前必须按下功能键，之后能够进行注册卡、修改授权密码以及注销卡等操作。69111

该论文有图28幅，表9个，参考文献15篇。

毕业论文关键词：52单片机射频卡密码锁系统

Design of Radio Frequency Code Lock System Based on the MCU

Abstract the code lock system has become increasingly important in life，so the intelligent code lock system based on 52 MCU has been achieved. The MCU is the control center of the code lock system，keyboard，Identification circuit of radio frequency card， buzzer warning circuit，password storage circuit and LCD display circuit are added in the periphery. In this design，before entering the door radio frequency card must be carried out to swipe. Once the system starts to work，the buzzer will send out the sound with the action of swiping the radio frequency card，the green indicator light will be lit in the condition of the card to be allowed，the indicator light will be off automatically after delaying for a period of time，red indicator light will be lit and the buzzer will also hurriedly rang in the condition that the authority of the card does not match with the user. You must press the function key before entering the set state， then you could register、modify and cancel the card etc.

Key Words: MCU52 radio frequency card the code lock system

摘要 I

Abstract II

图清单 V

表清单 VI

1 绪论 1

1.1研究背景 1

1.2发展趋势 1

2设计方案简述 3

2.1 方案选择 3

2.2 密码锁系统的总体结构图 4

3 电路详细设计 5

3.1 电路控制的模块 5

3.2 射频卡识别模块 6

3.3 LCD1602电路 11

3.4 存储电路 16

3.5 键盘模块电路 19

3.6 报警模块电路 21

4 软件详细设计 23

4.1 操作流程图 23

4.2 检测卡片流程图 23

4.3 详细程序设计流程图 24

4.4 模块详细设计功能 24

5 系统程序调试以及解析 25

6 系统的安装与调试 27

6.1调试的步骤 27

6.2遇到的问题 STC89C52单片机的射频密码锁设计+流程图:http://www.youerw.com/zidonghua/lunwen_77831.html