Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof, Having regard to the proposal from the Commission, Having regard to the opinion of the European Parliament (1).43917 Having reg...

unbalancing are discussed. 1 Introduction Machining with high speeds (HSM) is one of the modern technologies, which in comparison with conventional cutting enables to increase efficiency, accuracy and quality of workpieces and at the some ti...

Vibration characteristics of a rotor-bearing system with pedestal looseness areinvestigated. A non-linearmathematical model containing sti!ness and damping forces withtri-linear forms is considered. The shooting method is used to obtain the...

Finite deformation mechanics in buckled thin filmson compliant supportsHanqing Jiang*, Dahl-Young Khang, Jizhou Song, Yugang Sun, Yonggang Huang , and John A. Rogers***Department of Mechanical and Aerospace Engineering, Arizona State Univer...

ABSTRACT Reconfigurable manufacturing systems were developed as a proposed solution to the varying market and customer requirements present in todays global market. The systems are designed to offer adaptability in machining functions and p...

AbstractThe comprehensive approach to the digital factory has become a subject of paramount importance to all major automotivecompanies, and the chances offered by it are numerous. However, extensive preliminary work is still necessary and t...

Abstract Cone crushers are used in the aggregates and mining industries to crush rock material. A model to predict the worn geometry of cone crushers was previously developed. In that model there was some disagreements between predicted and...

Abstract: Flexible fixturing is a necessary aspect of Flexible Manufacturing Systerm(FMS) and Computer-Integrated Manufacturing Systems(CIMS)，Modular fixture are most widely used in industry for job and batch production. Computer-aided fi...

Abstract: The objective of this paper is to present a method for determining elastic modulus, yield strength and the true stress-true strain diagram of an aluminum alloy in a virtually non-destructive manner. Standard test methods for predic...

Objective: The aim of this study was to evaluate strain distribution in peri-implant bone,stress in the abutments and denture stability of mandibular overdentures anchored bydifferent numbers of implants under different loading conditions, t...