The hydroforming technology has been spreaded dramatically in automotive industry during the last 10 years. The advantages of hydroforming (less thinning, a more efficient manufacturing process, etc.) can, for instance, be combined with the...
Abstract: The investigated autonomous control system for a squeeze mode magnetorheological (MR) vibration isolator is based on an ultra-low power microcontroller MSP430F5529. The design structure of the control system and the dedicated real...
AbstractThis paper shows how a selected forming process (coldextrusion) can be evaluated by using the part informationavailable from the CAD-system, e.g. volume, geometryand material. In particular, the energy needed to form thepart as well...
Abstract - Stability and traction are critical to mobile robots cruising in uneven terrains. A small track-wheel-legged mobile robot was developed. Wheel-legged mode which combined wheeled and legged body with their respective merits of ins...
Modal Identification and Damage Detection for Structural Health Monitoring Under Ambient Vibration Environment INTRODUCTION Recent developments in sensor technologies and research findings in vibration based structural health monitoring have...
The influence of cavity deformation on the shrinkage and warpageof an injection-molded part Abstract As soon as the gate solidifies or the nozzle isclosed, the amount of melt inside a cavity remains constant.At this moment, the cavity deform...
By integration of machinery development The modern science and technology unceasing development, impelled different discipline intersecting enormously with the seepage, has caused the project domain technological revolution and the transfor...
The connecting rod is one of the five big engine, engine is important safety pieces. The quality of the connecting rod directly influence engine performance and security. The connecting rod from the structure is not complex, but the connect...
预应力混凝土构件的抗弯设计4.1绪论弯曲应力是外部环境、施加压力或弯矩作用的结果。大多情况下，无论是先张法还是后张法，它们都控制着预应力混凝土截面几何尺寸的选择。设计...
Industrial summary The stamping process of manufacturing a one-piece rear floor panel of a passenger car has been investigated in the present study. An analysis of the original die design, in which a split defect occurred at the drawn-cup w...
