摘要：本次毕业设计的内容是烟台港区的油码头结构设计，对该码头进行方案对比，并对码头的沉箱部分进行结构内力的计算。根据码头的相关地质情况，再结合油码头的特点以及各种码头形式的优缺点，确定本次油码头采用重力式沉箱结构。在我的这次毕业设计中，首先初步确定了沉箱的外形尺寸，然后进行作用分析，按照永久作用、可变作用、偶然作用列出码头荷载的标准值，然后在此基础上进行稳定性验算。最后进行作用效应组合,并对沉箱前后面板和底板等进行配筋计算和抗裂验算。最后绘制图纸，包括码头平面图、三视图以及配筋图，本次设计的全部图纸全部采用AUTOCAD绘制。
关键词：重力式码头；沉箱；油码头；浮游稳定性
Abstract：The design of the graduation project is Yantai port oil terminal structure design, the terminal for the program comparison, and the wharf part of the structure of the internal force calculation. According to the relevant geological conditions of the terminal, combined with the characteristics of the oil terminal and the advantages and disadvantages of various forms of the terminal,we determined the oil terminal using gravity caisson structure.
In my graduation design, the initial shape of the caisson was first determined, and then the action analysis was carried out. The standard values of the terminal load were listed according to the permanent effect, the variable effect and the accidental effect, and then the stability check was carried out on this basis.Finally, the effect combination, and the caisson before and after the panel and floor, such as reinforcement calculation and anti-cracking check.
Finally the drawings were drawed, including the terminal planing, all the drawings are used with AUTO CAD software.
Key words: gravity dock; caisson; oil wharf; floating stability
目录
第一章设计背景1
1.1工程概述1
1.2设计原则1
1.3设计依据1
1.4设计任务1
1.5装卸工艺1
第二章设计资料2
2.1地形条件2
2.2气象条件2
2.2.1风速2
2.2.2气温2
2.2.3降水2
2.2.4风3
2.2.5雾3
2.3水文条件3
2.3.1设计水位·3
2.3.2波浪要素·4
2.3.3潮流条件·4
2.3.4潮位4
2.4地质条件5
第三章码头总平面设计7
3.1总平面布置原则·7
3.2主要建设规模的确定·7
3.2.1泊位通过能力计算7
3.2.2泊位数计算·8
3.3码头尺度及高程计算·8
3.3.1泊位长度·8
3.3.2码头前沿高程9
3.4水域计算9
3.4.1码头停泊水域9
3.4.2码头前沿设计水深9
3.4.3码头前沿底高程·10
3.4.4进港航道10
3.4.5航道水深10
3.4.6船舶制动水域11
3.4.7船舶回旋水域11
3.4.8港池·11
第四章装卸工艺·12
4.1装卸工艺流程12
4.2设备选型及工艺12
4.2.1装船泵·12
4.2.2装卸臂·12
4.3管线13
4.3.1管径计算13
4.3.2管材的选用13
4.3.3管道布置与补偿·13
4.4储存罐13
第五章结构形式及作用分类·15
5.1胸墙尺寸·16
5.2基床尺寸·17
5.3结构自重力（永久作用）17
5.4土压力21
5.5贮仓压力·25
5.5.1前仓格贮仓压力·25
5.6可变作用·26
5.6.1作用于船舶上的风荷载26
5.6.2作用于船舶上的水流力27
5.6.3船舶系缆力29 某油码头结构规范设计研究+CAD图纸:http://www.youerw.com/gongcheng/lunwen_203709.html