南京信息职业技术学院宿舍楼设计+CAD图纸

摘要：本工程位于南京市栖霞区南京信息职业技术学院内，拟建建筑共5层，高18.75米，建筑面积约3200平方米。针对本工程主要进行了建筑与结构两方面的设计。建筑设计中针对宿舍楼的特殊性和功能性，除了在建筑内布置宿舍、浴室、卫生间等基本功能区块外，还布置了门卫室、活动室、开水间等区块。根据任务书要求，除编写了建筑总说明外，还完成了正立面图、侧立面图、剖面图、楼梯详图以及各标准层建筑平面图的绘制。结构设计中根据任务书要求依次完成了PKPM建模、sap2000内力分析、一榀框架设计、基础设计、楼梯设计、中间层楼板设计、次梁设计。并依据软件电算结果绘制了平面布置图、楼板配筋图、梁柱结构施工图、基础布置图及配筋图、楼梯配筋图，并编写了计算书以及设计说明。50047

毕业论文关键词：宿舍楼；框架结构；建筑设计；结构设计；计算书

Dormitory building design of NJCIT

Abstract:The project is located in Qixia District, Nanjing City, Nanjing College of Information Technology, the proposed construction of a total of 5, 18.75 meters high, construction area of about 3200 square meters. According to this project, the design of the two aspects of architecture and structure is mainly carried out. Architectural design for the special features and functionality of the dormitory, in addition to the construction of the dormitory, bathrooms, bathrooms and other basic functions block, but also arranged a guard room, activity room, water room, etc.. According to the requirements of the task book, besides write the general description of construction and complete a elevation, side elevation, profile, details of the stairs and the standard floor plan drawing. In the structural design according to the requirements of the task book in order to complete the PKPM modeling, SAP2000 internal force analysis, a pin frame design, foundation design, stair design, floor design and secondary girder design. And on the basis of the software calculation results to draw the layout, slab reinforcement plans, beam column structure construction drawing, basic layout diagram and reinforcement plan stairs reinforcement plan, and the preparation of the calculations and design specifications.

Key word：dormitory building;frame structure;architectural design;structure design;Statement

摘要1

ABSTRACT 1

1. 建筑设计部分 1

1.1 工程概况 1

1.1.1 工程概况及名称1

1.2宿舍楼的建筑说明 1

1.2.1设计思路 2

1.2.2 建筑空间功能 2

1.2.3 交通联系部分的平面设计2

1.2.4 建筑立面设计2

1.2.5 建筑剖面设计3

1.2.6 建筑平面设计4

1.2.7 建筑构造说明4

2. 结构设计部分 5

2.1 工程概况 5

2.2 构造做法 6

2.3 基本参数及设置依据 7

2.4 结构平面布置 7

2.5 框架梁柱截面尺寸确定 8

3. 结构设计部分 9

3.1 荷载计算 9

3.1.1 恒荷载计算 11

3.1.2 活荷载计算 11

3.1.3 风荷载计算 11

3.2内力计算(借助软件进行) 12

3.2.1 恒荷载作用下的内力计算 12

3.2.2 活荷载作用下的内力计算 16

3.2.3 风荷载作用下的内力计算 23 南京信息职业技术学院宿舍楼设计+CAD图纸:http://www.youerw.com/gongcheng/lunwen_53246.html