摘要为了保证引信体结构设计可靠性，通过理论计算校核了引信螺纹连接强度；为了保证验证后坐保险的解除保险可靠性，通过理论计算的方式计算了剪切销的强度；为了保证弹簧设计的正确性，通过理论计算验证其强度和设计的可用性。其结果表明各零件的强度满足要求。为了保证引信保险和解除保险的可靠性，通过理论计算得出离心解除保险的可靠性和后坐解除保险的可靠性；通过理论计算求得其滚落安全高度和跌落安全高度，其结果要保证在引信1.5 m跌向钢板时不能解除保险和足够高的滚落距离；为了保证引信的延期解除保险距离，通过理论计算的得出转子的转正时间和延期解除保险距离，其结果保证延期距离大于炮口安全距离。为了保证引信转正之后的固定，通过理论计算反恢复机构作用的可靠性；为了验证引信自毁性能，通过理论计算出侧击针刺入雷管深度0.6mm时，侧击针簧的拉压状态，结果表明侧击针簧的状态是被压缩。为了保证引信的发火可靠性，通过理论计算求得撞击速度，求得其可靠性；为了保证零部件设计尺寸及结构合理性，需要对重要结构尺寸进行进行尺寸链计算。25736
关键字 榴弹发射器 弹头触发引信 自毁 尺寸链 保险 解除保险 可靠性
毕业论文设计说明书外文摘要
Title System design and analysis and calculation for a Grenade launchers warhead fuze
Abstract
To ensure reliable fuse body structure design, strength must be checked, check the fuse by theoretical calculations threaded connection strength.To ensure the back seat pin cut shear pin through recoil, check needs to be calculated by the theoretical strength of the shear pin. To ensure the correctness of the spring design, through theoretical calculations to verify the availability of strength and design. The results show the strength to meet the requirements of the parts. To ensure insurance and arming of reliability，the arming reliability and recoil arming of reliability was calculated by theoretical calculation through theoretical calculations seeking a safe altitude and drop it rolled down a safe altitude，The results to ensure that the fuse 1.5 m can not be released when the fall to a sufficiently high insurance and steel rolling distance；In order to meet the extension fuze arming distance,use the static mapping to get motion parameters clockwork,and calculation of the rotor and positive time delay arming distance, the results show that the extension distance is longer than the muzzle safe distance. In order to ensure the fixed fuse after positive，the reliability of he anti-recovery mechanism action shold be calculated；In order to verify the performance of self-destruct fuze，the heoretical calculation of the state of the needle into the detonator when sideswipe depth 0.6mm shold be down , the results show that the state of sideswipe pin spring is compressed, in line with the requirements of self-destruction；To ensure the ignition performance of the fuze，the impact velocity is obtained by theoretical calculations, and then calculated the impact energy, checking ignition reliability；To ensure the rationality of size and structure design，dimensions chain of important dimension of fuze were calculated.
Key words ： Grenade Launcher fuze of warhead trigger self-destruction dimensions chain safety arming reliability
目 次
1 引言 1
1.1研究的背景和意义2
1.2国内外发展状况3
2 总体设计6
2.1引信主要战术技术指标6
2.2技术方案的分析和选择6
2.3作用原理8
3 强度校核9
4 弹簧设计计算10
4.1离心子簧10 榴弹发射器弹头机械触发引信系统分析与设计计算:http://www.youerw.com/jixie/lunwen_19659.html