毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

ATmega128一维弹道修正弹控制电路的设计与实现

时间:2020-12-03 20:52来源:毕业论文
使用Altium Designer软件设计升压起爆电路、铁电存储器电路,并制作PCB印刷电路板;同时使用C语言对选用的ATmega 128单片机进行编程,以接收GPS信号并加以存储。本文的研究为一维弹道修正

摘要现代战争中,科技的进步促使武器弹药向智能化、精确化的方向发展,且要求弹药降低对非军事目标的附带毁伤,同时各国都希望最大限度的节省军费开支,所以提高常规弹药的打击精度成为各国武器研制的焦点问题。弹道修正弹应运而生。本文即针对某型弹药,设计其一维弹道修正机构的弹载计算机。60243

论文首先搜集弹道修正弹的相关资料,对国内外此技术的现状进行归纳分析,从而了解相关软件、硬件设计要求和特点。然后使用Altium Designer软件设计升压起爆电路、铁电存储器电路,并制作PCB印刷电路板;同时使用C语言对选用的ATmega 128单片机进行编程,以接收GPS信号并加以存储。本文的研究为一维弹道修正弹的弹载计算机研制提供了理论依据。

毕业论文关键词:弹道修正 升压起爆 铁电存储器 单片机 GPS

毕业设计说明书(论文)外文摘要

Title  The design and implementation of control circuit of

        one-dimensional trajectory correction projectile 

Abstract In modern war, the progress of science and technology  promote weapons and ammunition to the direction of intelligence,accuracy,and require ammunition reduce collateral damage to non-military targets,at the same time,all countries want to save military spending as far as possible,so improving the hit precision of the conventional ammunition becomes a focal point of weapons development.Trajectory correction appears .This paper aims at a certain type of ammunition,designing the one-dimensional trajectory correction institution of onboard computer.

      Firstly,this paper collects related information,then  sums up and analyses the present situation of the technology at home and abroad ,to understand the design requirements and features of related software and hardware .Then the paper uses Altium Designer software to design booster and detonate circuit,FRAM circuit,and produce PCB printed circuit board; At the same time,using C language to choose ATmega 128 singlechip  programming, in order to receive GPS signals and to store them.The research of this paper provides a theoretical basis for the one-dimensional trajectory correction shell onboard computer development.

Keywords   trajectory correction,boost and detonate,FRAM,singlechip,GPS

1  绪论 1

1.1  课题研究背景 1

1.2  国内外研究现状及发展趋势 2

1.3  本文研究目的、方法及主要内容 6

1.4  本章小结 7

2  方案概述 8

2.1  控制系统方案 8

2.2  GPS方案 9

2.3  本章小结 15

3  硬件设计 16

3.1  升压电路设计 16

3.2  起爆电路设计 17

3.3  升压起爆电路的PCB板设计 18

3.4  弹载存储器设计 18

3.5  状态指示电路设计 19

3.6  本章小结 21

4  底层软件设计 22

4.1  ATmega 128单片机简介 22

4.2  软件总体设计 22

4.3  GPS数据处理 ATmega128一维弹道修正弹控制电路的设计与实现:http://www.youerw.com/jixie/lunwen_65659.html

------分隔线----------------------------
推荐内容