毕业论文移动版

摘要在现有的许多中小型纺织企业中，由于受到研发力量、 生产能力和生产规模的限制，导致企业所采用的纺织品的质量和纺织机械的科技含量不高，这也很大程度地影响了纺织的质量。尽管国内已经拥有了大量的自动验布机，但是还没有获得广泛应用，大部分的企业还在采用目测的方式。86278

    所以为了解决这种问题，本课题根据市场上的一些厂家的自动验布机，并且结合国内外验布机的发展现状和趋势，对自动验布机的机械系统进行研究和设计，为实现机器视觉功能、减少人力投入和提高验布效率作出努力。

本文主要从自动验布机的机械系统着手，在了解自动验布机的功能和结构上，对自动验布机的具体结构进行设计和校核。本文首先介绍了自动验布机与普通人工验布机的结构上和功能上的区别，接着对整个验布机的架构进行讨论，再针对具体的结构设计进行合理的设计校核，主要包含验布台、卷布辊和放布辊等结构的设计。在确定尺寸基础上用SolidWorks软件进行机械系统的具体零件的三维建模，然后进行装配体的组装，接着进行干涉检查，对有问题的进行检查和重新设计。

毕业论文关键字：自动验布机；机械系统；SolidWorks

Abstract In many existing small and medium-sized textile enterprises, due to the limitation of research and development strength, production capacity and production scale, resulting in enterprise the textile quality and textile machinery science and technology content is not high, which also greatly affected the quality of the textile。 Although China has a large number of automatic cloth inspection machine, but also did not get a wide application, most enterprises are still using the visual way。

So in order to solve this problem, this paper based on the market, some manufacturers of automatic inspection of fabric machine, and the combination of inspecting the development status and trend of cloth machine at home and abroad, for automatic inspection of cloth machine mechanical system is studied and designed。 For machine vision, reduce manpower and improve test efficiency efforts。

This paper mainly from the automatic cloth inspection machine system, in the understanding of the automatic cloth inspection machine function and structure, the automatic cloth inspection of the specific structure of the design and check。 First of all, this paper introduces the automatic inspection of cloth machine with artificial cloth machine structure and function of the difference between test, then the whole fabric inspection machine architecture are discussed, for the specific design of the structure of reasonable design and check, mainly includes the test cloth, cloth roller and cloth and etc。 structure design。 On the basis of determining the size of the mechanical system with SolidWorks software, the specific parts of the three-dimensional modeling, and then assembly of the assembly, and then the interference check, the problem of inspection and redesign。

Keywords：Automatic inspection machine;Mechanical systems;SolidWorks 

目录

第一章 绪论 1

1。1 课题研究的背景 1

1。2 课题研究的目的和意义 2

1。3 国内外的研究现状 3

1。3。1 国内现状 3

1。3。2 国外现状 4

1。4 本文主要研究内容和总体思路 5

1。4。1 研究的主要内容 5

1。4。2 基本设计思路 (责任编辑：qin)