UG帽型塑料模具设计及制造+CAXA图纸
时间:2020-03-05 10:39 来源:毕业论文 作者:毕业论文 点击:次
| 摘要本次的毕业设计主要是研究帽型塑料件的成型过程，主要内容包括帽型零件的工艺性能分析、模具总体结构的设计、注射机型号的选择及其工艺参数的确定和推出机构的设计等。因为该零件为塑料制件，所以采用注射成型，在注射成型过程中，浇注系统的设置非常关键。因此每一个参数的选择都很慎重，还要考虑溢出和泄漏的问题，所以在成型过程中对密封的要求也是特别高，以防发生意外伤到操作人员。设计内容的数据选择以及技术性参考都来自参考文献。通过本设计，可以对注塑模具有一个较深的认识，注意到设计中的某些细节问题，了解模具结构及工作原理；通过对UG的学习，可以建立较简单零件的零件库，从而有效的提高工作效率；通过画装配图、零件图，进一步系统深化CAD熟练程度，加深了对模具各个零件的认识。通过整个毕业设计的过程，知道了很多问题，知道了很多自己不了解的专业知识，遇到了很多困难，在问题出现时，学习解决问题。整个毕业设计不仅仅是毕业的总结，也是对自己接受一项任务时的磨练和能力的考验，从而慢慢提高自己解决问题、分析问题以及各方面的综合能力。45886 毕业论文关键词：分型面；浇注系统；型芯；型腔 Abstract Business, so the overall performance analysis process of this graduation design mainly is the study of cap type plastic parts forming process, the main contents include cap type parts, mold structure design, injection machine type selection and process parameters are identified and pushing mechanism design. Because the parts and plastic parts by injection molding in the injection molding process, gating system settings is critical. Therefore each parameter choice are very cautious, but also consider the overflow and leakage problems, so in the forming process of sealing requirements are particularly high, in order to prevent injury to the operating personnel. Design of data selection and technical reference are from refs Examination literature.Through this design, to mold with a deeper understanding and attention to some of the details of the design, to understand the structure and working principle of mold. Through the study of UG, a relatively simple parts of parts library, so as to effectively improve work efficiency; by drawing the assembly drawing, part drawing, further deepening the CAD proficiency, deepen the understanding of the various parts of mold.Through the graduation design process, know a lot of problems and know many do not understand their own professional knowledge, met many difficulties, in problems, and to learn to problem solve. Design of the entire graduation is not only a summary of the graduation, is of a task you will accept training and ability test, in order to gradually improve to solve their own problems, problem analysis and the comprehensive ability. Keywords：Parting surface; gating system; core; cavity 目 录 第一章 塑料成型工艺性能分析 １ 1.1材料的性能分析1 1.2零件分析1 1.3注射成型的工艺参数3 第二章 模具总体结构设计4 2.1分型面位置的确定4 2.2型腔数目和排列方式的确定5 2.3浇注系统的设计5 2.3.1浇注时的注意点5 2.3.2主流道设计5 2.3.3分流道设计6 2.3.4浇口设计7 2.4型腔和型芯尺寸的计算7 2.4.1型腔的尺寸计算8 2.4.2型腔深度计算9 2.4.3型芯的尺寸计算10 2.4.4型芯高度计算11 第三章 注射机型号的确定12 3.1注射量的计算12 3.2工艺参数的校核12 3.3注塑机型号的选择12 第四章 推出机构的设计14 4.1推杆的位置与数量设计14 4.2推出机构设计的原则14 第五章 导向机构的设计15 (责任编辑：qin) |