毕业论文移动版

摘要本文主要任务是在现有实验室大门基础上进行改造设计，实际实验室大门要求安全、防雨、防腐蚀，外观大方，操作简单方便，易于维修。

    根据上述要求，本人进行实地考察，查阅相关资料，进行详细论证，结构方案设计、具体零部件设计、电气控制系统设计、机构强度校核。本文设计的实验室大门采用悬挂式，使用钢丝绳来拉动门体在导轨上移动。采用蜗轮蜗杆减速，电机驱动，设计有相应的电气控制系统。配有挡雨板、门铃等辅助设施。最后，对其中的关键部件进行强度和刚度校核。本次设计改进，实现一部电机完成门的开启和关闭，保证了门在外界复杂多变环境下的正常使用。同时，门的可靠度也得到了保证。63513

毕业论文关键词  改造  导轨  蜗杆减速  电气控制

毕业设计说明书（论文）外文摘要

Title     The transformation of laboratory electric door              

Abstract This task of this paper is the renovation design of laboratory door based on existing laboratory door. The actual lab door requires meeting the needs of security, weatherproof, corrosion, elegant appearance, simple operation and easy maintenance. 

According to the above requirements, I make an on-the-spot investigation , refer to relevant data, conduct a detailed feasibility studies, structural design, detailed component design, electrical control system design, mechanical strength check. This design uses the hanging laboratory door and rope is used to pull the door on the rail movement. Using worm reducer, motor drives, a corresponding electrical control system is designed. The door is equipped with flashings, doorbell and other auxiliary facilities. Finally, one of the key components of the strength and rigidity check is conducted. The design achieve the effect opening and closing the door with one complete motor and ensure that the door works normally in complex environments. Meanwhile, the reliability of the door has also been guaranteed.

Keywords  transform  guide  worm reducer  electrical control

目   录

1 绪论 2

1.1 电动门概述 2

1.1.1 电动门及其发展 2

1.1.2 电动门的各项功能 2

1.1.3 电动门分类 3

1.1.4 电动门材质 3

1.1.5电动门构成 4

2 电动门的设计 4

2.1 电动门的设计要求 4

2.2 电动门的设计流程 5

2.3电动门的具体设计 6

2.3.1 采集数据 6

2.3.2 明确要求 6

2.3.3 初步方案 7

2.3.4 改进方案 8

2.3.5 参数设计 8

3 关键部位的校核 25

3.1 摩擦阻力计算 25

3.2 钢丝绳安全系数校核 26

3.3 蜗轮蜗杆校核 27

3.3.1 强度校核 27

3.3.2 刚度校核 29

3.3.3 蜗杆传动精度等级选择 30

结 论 (责任编辑：qin)