毕业论文移动版

摘要模具设计制造的方法有很多种，冲压模具，吹塑模具，注塑模具，等。笔者本次所做 的设计是注塑模具。注塑模具相对于其他成型方法，优点很多，一次成型可以多次使用， 创造巨大利益。可以一模多腔进行注塑。而且表面质量、产品合格率相较于其他模具设计 都有大幅提高。笔者的设计分为几个步骤来的。首先对塑件进行测量，因为三卡固定接线 盒上盖形状较不规则，测量尺寸略有困难，用 CAD 软件来记录塑件具体尺寸。然后通过 UG 三维软件抄画出具体塑件形状，再而分析选择出塑件分型面；根据零件尺寸计算出单个塑 件所需注射量，在乘以型腔数，选择出所需注射机，选择标准模架，支承零件，等。再来 运用 Mold  Flow 软件进行模流分析。70012

该论文有图 18 幅，表 10 个，参考文献 24 篇。

毕业论文关键词：注塑模 CAD UG Moldflow

Injection mold design for three card is fixed on the junction box cover

Abstact Mold design and manufacture of a variety of methods, stamping die, blow mold, injection mold, etc.. The author of this design is the injection mold. Compared with other forming methods, the injection mold has many advantages, it can be used for many times, and it can create great benefits. Can be a mold cavity for injection molding. And surface quality, product pass rate compared to other mold design has increased significantly. The author's design is pided into several steps to. First of all, the plastic parts to be measured, because the three card fixed junction box cover shape is irregular, measuring the size of a little difficult, using CAD software to record the specific dimensions of plastic parts. Then through the UG software to copy the drawing out specific shapes of plastic parts, and then analyze choose plastic pieces of parting surface; according to the parts size calculation of the single plastic parts required injection quantity, multiplied by the number of cavities, choose the required injection machine, selecting the standard mold base supporting parts,. Then use Flow Mold software to carry on the mold flow analysis.

Key words：Injection mold CAD UG Moldflow

目录

目录 1

1  绪论 1

1.1 本课题研究内容 1

1.2 本课题研究的目的和意义 2

1.3 课题研究现状 3

1.4 课题研究主要内容、实施方案及创新点 3

2 塑件工艺分析 5

2.1 塑料的组成和工艺性 5

2.2 塑件成型的工艺性 5

2.3 硬质聚氯乙烯的工艺特性 6

3 三卡固定接线盒上盖注塑模具方案设计 7

3.1 方案设计选用 7

3.2 方案选择 7

4 注塑机的选型 8

4.1 注射机型号的选择 8

4.2 型腔数目的校核 9

4.3 注射机工艺参数的校核 10

5 (责任编辑：qin)